메인 콘텐츠로 스킵하기
도움말

현재 버전 게시자: jayeff ,

본문:

Hi,
 
Try shining a torch at an angle close to the screen (when it is black) to see if you can detect a display at all. It will be dim, so a darkened room will help.
 
''If you can 'see' a display'' then you have a problem with the backlighting. This could be a video cable problem, a backlight power supply problem or even a lid switch problem. The lid switch controls the backlighting either through software control or a direct power connection through the switch itself, I'm not sure which in regard to your particular model
 
''If you can't see a display'' connect an external monitor to view its' display.
 
''If it stays OK'' when the laptop's screen turns black you either have a faulty video cable, faulty or loose video cable connections at either end, motherboard(motherboard or screenscreen), or a faulty screen.
''If it stays OK'' when the laptop's screen turns black you either have a faulty video cable, faulty or loose video cable connections at either end, motherboard(motherboard or screenscreen), or a faulty screen.
 
''If it also loses its' display'', you either have a faulty GPU or a motherboard problem (which is probably the same thing as the GPU is most probably mounted onto the motherboard).
 
You could also try running the laptop in 'safe mode' in case it is a graphics driver problem. In 'safe mode' Windows only loads the basic drivers.

현황:

open

편집 작업: jayeff ,

본문:

Hi,
 
Try shining a torch at an angle close to the screen (when it is black) to see if you can detect a display at all. It will be dim, so a darkened room will help.
If you can 'see' a display then you have a problem with the backlighting. This could be a video cable problem, a backlight power supply problem or even a lid switch problem. The lid switch controls the backlighting either through software control or a direct power connection through the switch itself, I'm not sure which in regard to your particular model
''If you can't see a display'' connect an external monitor to view its' display.
 
''If it stays OK'' when the laptop's screen turns black you eithercan 'see' a display'' then you have a faultyproblem with the backlighting. This could be a video cable, faulty or loose video cable connections atproblem, a backlight power supply problem or even a lid switch problem. The lid switch controls the backlighting either end, motherboard or screen,through software control or a faulty screen.direct power connection through the switch itself, I'm not sure which in regard to your particular model
''If it stays OK'' when the laptop's screen turns black you eithercan 'see' a display'' then you have a faultyproblem with the backlighting. This could be a video cable, faulty or loose video cable connections atproblem, a backlight power supply problem or even a lid switch problem. The lid switch controls the backlighting either end, motherboard or screen,through software control or a faulty screen.direct power connection through the switch itself, I'm not sure which in regard to your particular model
 
''If you can't see a display'' connect an external monitor to view its' display.
 
''If it stays OK'' when the laptop's screen turns black you either have a faulty video cable, faulty or loose video cable connections at either end, motherboard or screen, or a faulty screen.
 
''If it also loses its' display'', you either have a faulty GPU or a motherboard problem (which is probably the same thing as the GPU is most probably mounted onto the motherboard).
 
You could also try running the laptop in 'safe mode' in case it is a graphics driver problem. In 'safe mode' Windows only loads the basic drivers.

현황:

open

편집 작업: jayeff ,

본문:

Hi,

Connect
Try shining a torch at an angle close to the screen (when it is black) to see if you can detect a display at all. It will be dim, so a darkened room will help.
If you can 'see' a display then you have a problem with the backlighting. This could be a video cable problem, a backlight power supply problem or even a lid switch problem. The lid switch controls the backlighting either through software control or a direct power connection through the switch itself, I'm not sure which in regard to your particular model
''If you can't see a display'' connect
an external monitor to view its' display.

Connect
Try shining a torch at an angle close to the screen (when it is black) to see if you can detect a display at all. It will be dim, so a darkened room will help.
If you can 'see' a display then you have a problem with the backlighting. This could be a video cable problem, a backlight power supply problem or even a lid switch problem. The lid switch controls the backlighting either through software control or a direct power connection through the switch itself, I'm not sure which in regard to your particular model
''If you can't see a display'' connect
an external monitor to view its' display.
 
''If it stays OK'' when the laptop's screen turns black you either have a faulty video cable, faulty or loose video cable connections at either end, motherboard or screen, or a faulty screen.
 
Try shining a torch at an angle close to the screen (when it is black) to see if you can detect a display at all. It will be dim, so a darkened room will help. If you can 'see' a display then you have a problem with the backlighting. This could be a video cable problem, a backlight power supply problem or even a lid switch problem. The lid switch controls the backlighting either through software control or a direct power connection through the switch itself, I'm not sure which in regard to your particular model
Try shining a torch at an angle close to the screen (when it is black) to see if you can detect a display at all. It will be dim, so a darkened room will help. If you can 'see' a display then you have a problem with the backlighting. This could be a video cable problem, a backlight power supply problem or even a lid switch problem. The lid switch controls the backlighting either through software control or a direct power connection through the switch itself, I'm not sure which in regard to your particular model
 
''If it also loses its' display'', you either have a faulty GPU or a motherboard problem (which is probably the same thing as the GPU is most probably mounted onto the motherboard).
 
You could also try running the laptop in 'safe mode' in case it is a graphics driver problem. In 'safe mode' Windows only loads the basic drivers.

현황:

open

편집 작업: jayeff ,

본문:

Hi,
 
Connect an external monitor to view its' display.
 
''If it stays OK'' when the laptop's screen turns black you either have a faulty video cable, faulty or loose video cable connections at either end, motherboard or screen, or a faulty screen.
Try
Try
shining a torch at an angle close to the screen (when it is black) to see if you can detect a display at all. It will be dim, so a darkened room will help. If you can 'see' a display then you have a problem with the backlighting. This could be a video cable problem, a backlight power cablesupply problem or even a lid switch problem. The lid switch controls the backlighting either through software control or a direct power connection through the switch itself, I'm not sure which in regard to your particular model
Try
Try
shining a torch at an angle close to the screen (when it is black) to see if you can detect a display at all. It will be dim, so a darkened room will help. If you can 'see' a display then you have a problem with the backlighting. This could be a video cable problem, a backlight power cablesupply problem or even a lid switch problem. The lid switch controls the backlighting either through software control or a direct power connection through the switch itself, I'm not sure which in regard to your particular model
 
''If it also loses its' display'', you either have a faulty GPU or a motherboard problem (which is probably the same thing as the GPU is most probably mounted onto the motherboard).
 
 
 
You could also try running the laptop in 'safe mode' in case it is a graphics driver problem. In 'safe mode' Windows only loads the basic drivers.

현황:

open

편집 작업: jayeff ,

본문:

Hi,
 
Connect an external monitor to view its' display.
 
''If it stays OK'' when the laptop's screen turns black you either have a faulty video cable, faulty or loose video cable connections at either end, motherboard or screen, or a faulty screen.
Try shining a torch at an angle close to the screen (when it is black) to see if you can detect a display at all. It will be dim, so a darkened room will help. If you can 'see' a display then you have a problem with the backlighting. This could be a video cable problem, a backlight power cable problem or even a lid switch problem. The lid switch controls the backlighting either through software control or a direct power connection through the switch itself, I'm not sure which in regard to your particular model
 
''If it also loses its' display'', you either have a faulty GPU or a motherboard problem (which is probably the same thing as the GPU is most probably mounted onto the motherboard).
 
Also try shining a torch at an angle close to the screen (when it is black) to see if you can detect a display at all. It will be dim, so a darkened room will help. If you can 'see' a display then you have a problem with the backlighting. This could be a video cable problem, a backlight power cable problem or even a lid switch problem. The lid switch controls the backlighting either through software control or a direct power connection through the switch itself, I'm not sure which in regard to your particular model
Also try shining a torch at an angle close to the screen (when it is black) to see if you can detect a display at all. It will be dim, so a darkened room will help. If you can 'see' a display then you have a problem with the backlighting. This could be a video cable problem, a backlight power cable problem or even a lid switch problem. The lid switch controls the backlighting either through software control or a direct power connection through the switch itself, I'm not sure which in regard to your particular model
 
You could also try running the laptop in 'safe mode' in case it is a graphics driver problem. In 'safe mode' Windows only loads the basic drivers.

현황:

open

편집 작업: jayeff ,

본문:

Hi,
 
Connect an external monitor to view its' display.
 
''If it stays OK'' when the laptop's screen turns black you either have a faulty video cable, faulty or loose video cable connections at either end, motherboard or screen, or a faulty screen.
 
''If it also loses its' display'', you either have a faulty GPU or a motherboard problem (which is probably the same thing as the GPU is most probably mounted onto the motherboard).
Also
Also
try shining a torch at an angle close to the screen (when it is black) to see if you can detect a display at all. It will be dim, so a darkened room will help. If you can 'see' a display then you have a problem with the backlighting.
Again this
This could be a video cable problem, a backlight power cable problem or even a lid switch problem. The lid switch controlcontrols the backlighting either through software control or a direct power connection through the switch itself.itself, I'm not sure which in regard to your particular model
Also
Also
try shining a torch at an angle close to the screen (when it is black) to see if you can detect a display at all. It will be dim, so a darkened room will help. If you can 'see' a display then you have a problem with the backlighting.
Again this
This could be a video cable problem, a backlight power cable problem or even a lid switch problem. The lid switch controlcontrols the backlighting either through software control or a direct power connection through the switch itself.itself, I'm not sure which in regard to your particular model
 
You could also try running the laptop in 'safe mode' in case it is a graphics driver problem. In 'safe mode' Windows only loads the basic drivers.

현황:

open

편집 작업: jayeff ,

본문:

Hi,
 
Connect an external monitor to view its' display.
 
''If it stays OK'' when the laptop's screen turns black you either have a faulty video cable, faulty or loose video cable connections at either end, motherboard or screen, or a faulty screen.
 
''If it also goes blackloses its' display'', you either have a faulty GPU or a motherboard problem (which is probably the same thing as the GPU is most probably mounted onto the motherboard).
Also try shining a torch at an angle close to the screen (when it is black) to see if you can detect a display at all. It will be dim, so a darkened room will help. If you can 'see' a display then you have a problem with the backlighting.
Again this could be a video cable problem or even a lid switch problem. The lid switch control the backlighting either through software control or a direct power connection through the switch itself.
''If it also goes blackloses its' display'', you either have a faulty GPU or a motherboard problem (which is probably the same thing as the GPU is most probably mounted onto the motherboard).
Also try shining a torch at an angle close to the screen (when it is black) to see if you can detect a display at all. It will be dim, so a darkened room will help. If you can 'see' a display then you have a problem with the backlighting.
Again this could be a video cable problem or even a lid switch problem. The lid switch control the backlighting either through software control or a direct power connection through the switch itself.
 
You could also try running the laptop in 'safe mode' in case it is a graphics driver problem. In 'safe mode' Windows only loads the basic drivers.

현황:

open

원문 게시자: jayeff ,

본문:

Hi,

Connect an external monitor to view its' display.

''If it stays OK'' when the laptop's screen turns black you either have a faulty video cable, faulty or loose  video cable connections at either end, motherboard or screen, or a faulty screen.

''If it also goes black'', you either have a faulty GPU or a motherboard problem (which is probably the same thing as the GPU is most probably mounted onto the motherboard).

You could also try running the laptop in 'safe mode' in case it is a graphics driver problem. In 'safe mode' Windows only loads the basic drivers.

현황:

open