주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: rbol ,

본문:

As with most mice, the large lever/button you push with your finger activates a very small microswitch. If this switch is damaged or defective, the actuator on it may get stuck in either the up or down position, or simply lose it'sits tactile click.
As with most mice, the large lever/button you push with your finger activates a very small microswitch. If this switch is damaged or defective, the actuator on it may get stuck in either the up or down position, or simply lose it'sits tactile click.
 
If the button is just sticking, you may be able to correct the issue by opening the mouse's outer shell, and using a precision screwdriver to pry up the edge of the actuator (usually a white circle inside a square black shell).
If the button is just sticking, you may be able to correct the issue by opening the mouse's outer shell, and using a precision screwdriver to pry up the edge of the actuator (usually a white circle inside a square black shell).
 
Otherwise, a replacement will be necessary - the microswitches are cheap and fairly generic, but this will require basic soldering.

현황:

open

편집 작업: rbol ,

본문:

As with most micemice, the large lever/button you push with your finger activates a very small microswitch. If this switch is damaged or has suffered abusedefective, the actuator on it may not work correctly, or a defectget stuck in its manufacturingeither the up or down position, or simply lose it's tactile click.

If the button is just sticking, you
may be stopping the true "button" from returningable to its resting position. Lightly prying at it may pop it loosecorrect the issue by opening the mouse's outer shell, and allow itusing a precision screwdriver to resume normal function; otherwisepry up the edge of the actuator (usually a repair will involve soldering inwhite circle inside a square black shell).

Otherwise,
a replacement switchwill be necessary - the microswitches are cheap and fairly generic, but this will require basic soldering.
As with most micemice, the large lever/button you push with your finger activates a very small microswitch. If this switch is damaged or has suffered abusedefective, the actuator on it may not work correctly, or a defectget stuck in its manufacturingeither the up or down position, or simply lose it's tactile click.

If the button is just sticking, you
may be stopping the true "button" from returningable to its resting position. Lightly prying at it may pop it loosecorrect the issue by opening the mouse's outer shell, and allow itusing a precision screwdriver to resume normal function; otherwisepry up the edge of the actuator (usually a repair will involve soldering inwhite circle inside a square black shell).

Otherwise,
a replacement switchwill be necessary - the microswitches are cheap and fairly generic, but this will require basic soldering.

현황:

open

원문 게시자: rbol ,

본문:

As with most mice the lever/button you push with your finger activates a small microswitch. If this switch is damaged or has suffered abuse it may not work correctly, or a defect in its manufacturing may be stopping the true "button" from returning to its resting position. Lightly prying at it may pop it loose and allow it to resume normal function; otherwise a repair will involve soldering in a replacement switch.

현황:

open