주요 콘텐츠로 건너뛰기
도움말

원문 게시자: TronicsFix ,

본문:

Just to be clear I would send it in if I were you.

That being said, if those metal channels are bent you can use a small pair of needle nosed pliers to bend them back in place. Just be sure to put something between the rails and the pliers so you don't mark up the rails...you could use a thin cloth or thin cardboard. You'll have to be very careful and bend with precision to get it in the form it needs to be in. This is no easy task in most cases so that's why I would just either exchange it or send it for repairs.

Hope this helps.

현황:

open