주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: L Pfaff ,

본문:

Waishon, The rice will have done very little if anything to save your device. Stop charging or powering up your device until the liquid damage is addressed correctly, as you could be shorting out components inside the phonecalculator. You really should take care of the corrosion ASAP that is happening inside the phone from the waterliquid damage as that could be your problem. A tear down link for your device Link #1 and 2, disassembly guide will enable you to get inside the device to remove the damage/corrosion caused by the liquid. Use the 3rd link as a guide/instruction on how to clean/repair the device from liquid damage. After this you will be able to power on the device and see if further damage has to be addressed. Good luck.
Waishon, The rice will have done very little if anything to save your device. Stop charging or powering up your device until the liquid damage is addressed correctly, as you could be shorting out components inside the phonecalculator. You really should take care of the corrosion ASAP that is happening inside the phone from the waterliquid damage as that could be your problem. A tear down link for your device Link #1 and 2, disassembly guide will enable you to get inside the device to remove the damage/corrosion caused by the liquid. Use the 3rd link as a guide/instruction on how to clean/repair the device from liquid damage. After this you will be able to power on the device and see if further damage has to be addressed. Good luck.
 
I hope this helped you out, if so let me know by pressing the helpful button.
 
[guide|31363]
 
[guide|31314]
 
[[Electronics Water Damage]]

현황:

open

원문 게시자: L Pfaff ,

본문:

Waishon, Stop charging or powering up your device until the liquid damage is addressed correctly, as you could be shorting out components inside the phone. You really should take care of the corrosion that is happening inside the phone from the water damage as that could be your problem. A tear down link for your device Link #1 and 2, disassembly guide will enable you to get inside the device to remove the damage/corrosion caused by the liquid. Use the 3rd link as a guide/instruction on how to clean/repair the device from liquid damage. After this you will be able to power on the device and see if further damage has to be addressed. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

[guide|31363]

[guide|31314]

[[Electronics Water Damage]]

현황:

open