주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: Scott ,

제목:

Power Button not responding after screen replacement

본문:

Hey guys. I just did a screen replacement, and now my power button doesn't work. if i plug in the device, it shows me it charging on the screen. so the new screen is funtional. I have tried with the old screen, just to verify it wasn't doing something weird with the circuit.

So far, I have tried the following.

- Cleaning the connectors, and reconnecting it.

- Made sure the continuity of the power button exists. (Used a multimeter while pressing the button)

- Reflowed general area of the power button.

im hoping to get a pinout of the power button area, and a place to purchase the female side of the BTB connector.  if anyone else has experienced this before, i would like to know how it was rectified. thankyou!

기기:

Dtek50

현황:

open

승인된 답변:

443603

원문 게시자: Scott ,

제목:

Power Button not responding after screen replacement

본문:

Hey guys. I just did a screen replacement, and now my power button doesn't work. if i plug in the device, it shows me it charging on the screen. so the new screen is funtional. I have tried with the old screen, just to verify it wasn't doing something weird with the circuit.

So far, I have tried the following.

- Cleaning the connectors, and reconnecting it.

- Made sure the continuity of the power button exists. (Used a multimeter while pressing the button)

- Reflowed general area of the power button.

im hoping to get a pinout of the power button area, and a place to purchase the female side of the BTB connector.  if anyone else has experienced this before, i would like to know how it was rectified. thankyou!

기기:

Dtek50

현황:

open