주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: James Dugger ,

제목:

OSX update cannot be installed on this disk does not meet requirements

본문:

I replaced my Western Digital black (original HDD) 1 TB HDD in my 27" mid 2010 imac with the Western Digital 2 TB purchased here at IFIXIT. Old Drive was bad and so I did a complete new install from the original DVD OSX Installation disk putting Snow Leopard back on the disk. It was able to link up to my apple account and restore applications.
 
However when I click on the apple logo (top left) and select update software, and after saying continue to update and restart the system, the system startup wallpaper comes back but no top menu bar and no app tray it seems to just hand there. I went to Apple and downloaded both the delta and the combo .dmg update versions of 10.6.4 and tried to install them. The installer stops after the agreement screen at the HDD page and says
 
"OSX update cannot be installed on this disk does not meet requirements"
 
I have gone to disk utility and checked and repaired the permissions and even ran disk verify all is OK. the drive has one partition which I named the same as the last HDD "Macintosh HD" it has 1.7 TB available space showing with the root directory "/" at the top of the directory tree.
 
Not sure what else to try.
 
=== Update (04/23/2017) ===
 
Dan Thanks for the information. I have been able to make a bootable install disk from a 16GB PNY USB drive. I have a company MacbookPro that I used to make it. I checked the firmware on my iMac it is a mid-2010 27" iMac 11,3 and the EFI Boot ROM Version is IM112.0057.B021. From the firmware web page you referenced the EFI Boot ROM Version listed for this mac is IM112.0057.03B (2015-002) I tried downloading this and installing it first on the iMac, however the installer stopped indicating that the the update needed to be run from OSX 10.9.5 or later.
 
I tried to install the OS on the iMac anyway. It would boot using the install usb drive. I erased and reformatted the HDD in the iMac and then ran the installer. It would start the install process and go through the 7 minute installation bar and then at the very end it would say error try reinstalling.
 
Not sure where to go from here. I is the error related to not being able to update the firmware? If so is it possible to update the firmware on the iMac using Target disk mode from the MacbookPro? It is running El Captain.

기기:

iMac Intel 27"

현황:

open

편집 작업: James Dugger ,

제목:

OSX update cannot be installed on this disk does not meet requirements

본문:

I replaced my Western Digital black (original HDD) 1 TB HDD in my 27" mid 2010 imac with the Western Digital 2 TB purchased here at IFIXIT. Old Drive was bad and so I did a complete new install from the original DVD OSX Installation disk putting Snow Leopard back on the disk. It was able to link up to my apple account and restore applications.
 
However when I click on the apple logo (top left) and select update software, and after saying continue to update and restart the system, the system the system starstartup wallpaper comes back but no top menu arebar and no app tray andit seems to just freezeshand there. I went to Apple and downloaded both the delta and the combo .dmg update versions of 10.6.4 and tried to install them. The installer stops after the agreement screen at the HDD page and says
However when I click on the apple logo (top left) and select update software, and after saying continue to update and restart the system, the system the system starstartup wallpaper comes back but no top menu arebar and no app tray andit seems to just freezeshand there. I went to Apple and downloaded both the delta and the combo .dmg update versions of 10.6.4 and tried to install them. The installer stops after the agreement screen at the HDD page and says
 
"OSX update cannot be installed on this disk does not meet requirements"
 
I have gone to disk utility and checked and repaired the permissions and even ran disk verify all is OK. the drive has one partition which I named the same as the last HDD Macintosh HD"Macintosh HD" it has 1.7 TB available space showing with the root directory "/" at the top of the directory tree.
I have gone to disk utility and checked and repaired the permissions and even ran disk verify all is OK. the drive has one partition which I named the same as the last HDD Macintosh HD"Macintosh HD" it has 1.7 TB available space showing with the root directory "/" at the top of the directory tree.
 
Not sure what else to try.

기기:

iMac Intel 27"

현황:

open

원문 게시자: James Dugger ,

제목:

OSX update cannot be installed on this disk does not meet requirements

본문:

I replaced my Western Digital black (original HDD) 1 TB HDD in my 27" mid 2010 imac with the Western Digital 2 TB purchased here at IFIXIT.  Old Drive was bad and so I did a complete new install from the original DVD OSX Installation disk putting Snow Leopard back on the disk.  It was able to link up to my apple account and restore applications.

However when I click on the apple logo (top left) and select update software, and after saying continue to update and restart the system the system star wallpaper comes back but no menu are app tray and just freezes.  I went to Apple and downloaded both the delta and the combo .dmg update versions of 10.6.4 and tried to install them.  The installer stops after the agreement screen at the HDD page and says

"OSX update cannot be installed on this disk does not meet requirements"

I have gone to disk utility and checked and repaired the permissions and even ran disk verify all is OK.  the drive has one partition which I named the same as the last HDD Macintosh HD it has 1.7 TB available space showing with the root directory "/" at the top

Not sure what else to try.

기기:

iMac Intel 27"

현황:

open