주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: oldturkey03 ,

본문:

@prokrastinator what you posted is not a schematic but a board layout view. It will not tell you how to connect a switch. You need the wiring diagram for that. I got this from the manual
 
[image|1178359]
 
Now you need to figure out on the board view which point is what. Going back to your image and checking the layout and schematic it appears that connecting a switch the way as pointed out in my pictures should work.
[image|1178370][image|1178368][image|1178371]
[image|1178370]

[image|1178368]

[image|1178371]
always double check with a meter to make sure that you do not close any power to ground circuit.
[image|1178370][image|1178368][image|1178371]
[image|1178370]

[image|1178368]

[image|1178371]
always double check with a meter to make sure that you do not close any power to ground circuit.

현황:

open

편집 작업: oldturkey03 ,

본문:

@prokrastinator what you posted is not a schematic but a board layout view. It will not tell you how to connect a switch. You need the wiring diagram for that. I got this from the manual
 
[image|1178359]
 
Now you need to figure out on the board view which point is what. Going back to your image and checking the layout and schematic it appears that connecting a switch the way as pointed out in my pictures should work.
[image|1178370][image|1178368][image|1178371]
Now you need to figure out on the board view which point is what. Going back to your image and checking the layout and schematic it appears that connecting a switch the way as pointed out in my pictures should work.
[image|1178370][image|1178368][image|1178371]

현황:

open

편집 작업: oldturkey03 ,

본문:

@prokrastinator what you posted is not a schematic but a board layout view. It will not tell you how to connect a switch. youYou need the wiring diagramdiagram for that. I got this from the manual
@prokrastinator what you posted is not a schematic but a board layout view. It will not tell you how to connect a switch. youYou need the wiring diagramdiagram for that. I got this from the manual
 
[image|1178359]
 
Now you need to figure out on the board view which point is what.

현황:

open

원문 게시자: oldturkey03 ,

본문:

@prokrastinator what you posted is not a schematic but a board layout view. It will not tell you how to connect a switch. you need the wiring diagram. I got this from the manual

[image|1178359]

Now you need to figure out on the board view which point is what.

현황:

open