주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: oldturkey03 ,

텍스트:

Dulan Wijesundara check the ribbon cables going from your T-con board to your panel. Make sure there are no small tears etc. Check that they are inserted straight into the connector and that the connector makes proper contact.
+
+=== Update (12/01/2017) ===
+
+Apply some gentle pressure on the TAB's and see if the image changes. [image|1286834]

현황:

open

원문 게시자: oldturkey03 ,

텍스트:

Dulan Wijesundara check the ribbon cables going from your T-con board to your panel. Make sure there are no small tears etc. Check that they are inserted straight into the connector and that the connector makes proper contact.

현황:

open