주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

도움말

현재 버전 게시자: alexbushell ,

텍스트:

All you need is some pry tools and the and a #00 Phillips screwdriver.
[https://www.ifixit.com/Store/Tools/Phillips-00-Screwdriver/IF145-006-4]
[https://www.ifixit.com/Store/Tools/iFixit-Opening-Picks-set-of-6/IF145-123-2]
 
First take off the back of the cover using the pry tools
 
Then remove the Kapton tape ( it should be a yellow translucent tape )covering the fingerprint scanner flex cover
 
Unscrew the fingerprint scanner (mentioned above)
 
And finally, use the pry tool between the screen and the phone and go down the sides while simultaneously prying the screen away .
 
When you have the screen out, you can replace it by doing these steps in a reverse order

현황:

open

원문 게시자: alexbushell ,

텍스트:

All you need is some pry tools and the and a #00 Phillips screwdriver.

First take off the back of the cover using the pry tools

Then remove the Kapton tape ( it should be a yellow translucent tape )covering the fingerprint scanner flex cover

Unscrew the fingerprint scanner (mentioned above)

And finally, use the pry tool between the screen and the phone and go down the sides while simultaneously prying the screen away .

When you have the screen out, you can replace it by doing these steps in a reverse order

현황:

open