메인 콘텐츠로 스킵하기
도움말

현재 버전 게시자: Nart Al-Sherqatli ,

제목:

Battery exploded, is the board damaged?

본문:

Hello Everyone,

I had a problem while fixing my friends iphone 6, as the battery was a bad one, and it exploaded during the action. Luckily, only the sim card plastic tray was burnt as I was able to see in addition to the fcp connector of the screen and front camera as they got out of thir places. My question is, would it work if I solder an fcp connector to the board? and what is the most recommended liquid flux to be used?

=== Update (01/05/2018) ===

[image|1310861]

[image|1310857]

[image|1310853]

[image|1310851]

[image|1310858]

[image|1310856]

[image|1310850]

[image|1310854]

[image|1310849]

[image|1310855]

[image|1310848]

[image|1310847]

[image|1310846]

please zoom in. here are better quality photos

=== Update (01/05/2018) ===

[image|1310845]

=== Update (01/05/2018) ===

=== Update (01/05/2018) ===

=== Update (01/05/2018) ===

[image|1310935]

[image|1310931]

zoom in

기기:

iPhone 6

현황:

open

승인된 답변:

452185

편집 작업: joe ,

제목:

Battery pryexploded, is the board damaged?
Battery pryexploded, is the board damaged?

본문:

Hello Everyone,
 
I had a problem while fixing my friends iphone 6, as the battery was a bad one, and it exploaded during the action. Luckily, only the sim card plastic tray was burnt as I was able to see in addition to the fcp connector of the screen and front camera as they got out of thir places. My question is, would it work if I solder an fcp connector to the board? and what is the most recommended liquid flux to be used?
 
=== Update (01/05/2018) ===
 
[image|1310861]
 
[image|1310857]
 
[image|1310853]
 
[image|1310851]
 
[image|1310858]
 
[image|1310856]
 
[image|1310850]
 
[image|1310854]
 
[image|1310849]
 
[image|1310855]
 
[image|1310848]
 
[image|1310847]
 
[image|1310846]
 
please zoom in. here are better quality photos
 
=== Update (01/05/2018) ===
 
[image|1310845]
 
=== Update (01/05/2018) ===
 
=== Update (01/05/2018) ===
=== Update (01/05/2018) ===
 
=== Update (01/05/2018) ===
 
[image|1310935][image|1310931image|1310935]

[image|1310931
]
[image|1310935][image|1310931image|1310935]

[image|1310931
]
 
zoom in

기기:

iPhone 6

현황:

open

편집 작업: Nart Al-Sherqatli ,

제목:

Battery pry, is the board damaged?

본문:

Hello Everyone,
 
I had a problem while fixing my friends iphone 6, as the battery was a bad one, and it exploaded during the action. Luckily, only the sim card plastic tray was burnt as I was able to see in addition to the fcp connector of the screen and front camera as they got out of thir places. My question is, would it work if I solder an fcp connector to the board? and what is the most recommended liquid flux to be used?
 
=== Update (01/05/2018) ===
 
[image|1310861]
 
[image|1310857]
 
[image|1310853]
 
[image|1310851]
 
[image|1310858]
 
[image|1310856]
 
[image|1310850]
 
[image|1310854]
 
[image|1310849]
 
[image|1310855]
 
[image|1310848]
 
[image|1310847]
 
[image|1310846]
 
please zoom in. here are better quality photos
 
=== Update (01/05/2018) ===
 
[image|1310845]
 
=== Update (01/05/2018) ===
 
=== Update (01/05/2018) ===
 
=== Update (01/05/2018) ===
 
[image|1310935][image|1310931]
 
zoom in

기기:

iPhone 6

현황:

open

편집 작업: Nart Al-Sherqatli ,

제목:

Battery pry, is the board damaged?

본문:

Hello Everyone,
 
I had a problem while fixing my friends iphone 6, as the battery was a bad one, and it exploaded during the action. Luckily, only the sim card plastic tray was burnt as I was able to see in addition to the fcp connector of the screen and front camera as they got out of thir places. My question is, would it work if I solder an fcp connector to the board? and what is the most recommended liquid flux to be used?
 
=== Update (01/05/2018) ===
 
[image|1310861]
 
[image|1310857]
 
[image|1310853]
 
[image|1310851]
 
[image|1310858]
 
[image|1310856]
 
[image|1310850]
 
[image|1310854]
 
[image|1310849]
 
[image|1310855]
 
[image|1310848]
 
[image|1310847]
 
[image|1310846]
 
please zoom in. here are better quality photos
 
=== Update (01/05/2018) ===
 
[image|1310845]
 
=== Update (01/05/2018) ===
 
=== Update (01/05/2018) ===

기기:

iPhone 6

현황:

open

편집 작업: Nart Al-Sherqatli ,

제목:

Battery pry, is the board damaged?

본문:

Hello Everyone,
 
I had a problem while fixing my friends iphone 6, as the battery was a bad one, and it exploaded during the action. Luckily, only the sim card plastic tray was burnt as I was able to see in addition to the fcp connector of the screen and front camera as they got out of thir places. My question is, would it work if I solder an fcp connector to the board? and what is the most recommended liquid flux to be used?
 
=== Update (01/05/2018) ===
 
[image|1310861]
 
[image|1310857]
 
[image|1310853]
 
[image|1310851]
 
[image|1310858]
 
[image|1310856]
 
[image|1310850]
 
[image|1310854]
 
[image|1310849]
 
[image|1310855]
 
[image|1310848]
 
[image|1310847]
 
[image|1310846]
 
please zoom in. here are better quality photos
 
=== Update (01/05/2018) ===
 
[image|1310845]
 
=== Update (01/05/2018) ===
 
[image|1310923]
 
[image|1310928]

기기:

iPhone 6

현황:

open

편집 작업: Nart Al-Sherqatli ,

제목:

Battery pry, is the board damaged?

본문:

Hello Everyone,
 
I had a problem while fixing my friends iphone 6, as the battery was a bad one, and it exploaded during the action. Luckily, only the sim card plastic tray was burnt as I was able to see in addition to the fcp connector of the screen and front camera as they got out of thir places. My question is, would it work if I solder an fcp connector to the board? and what is the most recommended liquid flux to be used?
 
=== Update (01/05/2018) ===
 
[image|1310861]
 
[image|1310857]
 
[image|1310853]
 
[image|1310851]
 
[image|1310858]
 
[image|1310856]
 
[image|1310850]
 
[image|1310854]
 
[image|1310849]
 
[image|1310855]
 
[image|1310848]
 
[image|1310847]
 
[image|1310846]
 
please zoom in. here are better quality photos
 
=== Update (01/05/2018) ===
 
[image|1310845]
[image|1310845]
 
=== Update (01/05/2018) ===
 
[image|1310923][image|1310928image|1310923]

[image|1310928
]
[image|1310923][image|1310928image|1310923]

[image|1310928
]

기기:

iPhone 6

현황:

open

편집 작업: Nart Al-Sherqatli ,

제목:

Battery pry, is the board damaged?

본문:

Hello Everyone,
 
I had a problem while fixing my friends iphone 6, as the battery was a bad one, and it exploaded during the action. Luckily, only the sim card plastic tray was burnt as I was able to see in addition to the fcp connector of the screen and front camera as they got out of thir places. My question is, would it work if I solder an fcp connector to the board? and what is the most recommended liquid flux to be used?
 
=== Update (01/05/2018) ===
 
[image|1310861]
 
[image|1310857]
 
[image|1310853]
 
[image|1310851]
 
[image|1310858]
 
[image|1310856]
 
[image|1310850]
 
[image|1310854]
 
[image|1310849]
 
[image|1310855]
 
[image|1310848]
 
[image|1310847]
 
[image|1310846]
 
please zoom in. here are better quality photos
 
=== Update (01/05/2018) ===
 
please zoom in. here are better quality photos[image|1310845]
please zoom in. here are better quality photos[image|1310845]
 
=== Update (01/05/2018) ===
 
[image|1310845image|1310923][image|1310928]
[image|1310845image|1310923][image|1310928]

기기:

iPhone 6

현황:

open

편집 작업: Nart Al-Sherqatli ,

제목:

Battery pry, is the board damaged?

본문:

Hello Everyone,
 
I had a problem while fixing my friends iphone 6, as the battery was a bad one, and it exploaded during the action. Luckily, only the sim card plastic tray was burnt as I was able to see in addition to the fcp connector of the screen and front camera as they got out of thir places. My question is, would it work if I solder an fcp connector to the board? and what is the most recommended liquid flux to be used?
 
=== Update (01/05/2018) ===
 
 
[image|1310861]
 
[image|1310857]
 
[image|1310853]
 
[image|1310851]
 
[image|1310858]
 
[image|1310856]
 
[image|1310850]
 
[image|1310854]
 
[image|1310849]
 
[image|1310855]
 
[image|1310848]
 
[image|1310847]
[image|1310846]
 
[image|1310846]
 
=== Update (01/05/2018) ===please zoom in. here are better quality photos
=== Update (01/05/2018) ===please zoom in. here are better quality photos
 
please zoom in
[image|1310899][image|1310900][image|1310903][image|1310905][image|1310902]
=== Update (01/05/2018) ===
please zoom in
[image|1310899][image|1310900][image|1310903][image|1310905][image|1310902]
=== Update (01/05/2018) ===
 
please zoom in. here are better quality photos[image|1310845]
please zoom in. here are better quality photos[image|1310845]

기기:

iPhone 6

현황:

open

편집 작업: Nart Al-Sherqatli ,

제목:

Battery pry, is the board damaged?

본문:

Hello Everyone,
 
I had a problem while fixing my friends iphone 6, as the battery was a bad one, and it exploaded during the action. Luckily, only the sim card plastic tray was burnt as I was able to see in addition to the fcp connector of the screen and front camera as they got out of thir places. My question is, would it work if I solder an fcp connector to the board? and what is the most recommended liquid flux to be used?
I had a problem while fixing my friends iphone 6, as the battery was a bad one, and it exploaded during the action. Luckily, only the sim card plastic tray was burnt as I was able to see in addition to the fcp connector of the screen and front camera as they got out of thir places. My question is, would it work if I solder an fcp connector to the board? and what is the most recommended liquid flux to be used?
 
=== Update (01/05/2018) ===
 
[image|1310861][image|1310857][image|1310853][image|1310851][image|1310858][image|1310856][image|1310850][image|1310854][image|1310849][image|1310855][image|1310848][image|1310847][image|1310846]
[image|1310861]

[image|1310857]

[image|1310853]

[image|1310851]

[image|1310858]

[image|1310856]

[image|1310850]

[image|1310854]

[image|1310849]

[image|1310855]

[image|1310848]

[image|1310847]

[image|1310846]

=== Update (01/05/2018) ===

please zoom in
[image|1310899][image|1310900][image|1310903][image|1310905][image|1310902]

please zoom in. here are better quality photos
[image|1310861][image|1310857][image|1310853][image|1310851][image|1310858][image|1310856][image|1310850][image|1310854][image|1310849][image|1310855][image|1310848][image|1310847][image|1310846]
[image|1310861]

[image|1310857]

[image|1310853]

[image|1310851]

[image|1310858]

[image|1310856]

[image|1310850]

[image|1310854]

[image|1310849]

[image|1310855]

[image|1310848]

[image|1310847]

[image|1310846]

=== Update (01/05/2018) ===

please zoom in
[image|1310899][image|1310900][image|1310903][image|1310905][image|1310902]

please zoom in. here are better quality photos

기기:

iPhone 6

현황:

open

편집 작업: Nart Al-Sherqatli ,

제목:

Battery pry, is the board damaged?

본문:

Hello Everyone,
 
I had a problem while fixing my friends iphone 6, as the battery was a bad one, and it exploaded during the action. Luckily, only the sim card plastic tray was burnt as I was able to see in addition to the fcp connector of the screen and front camera as they got out of thir places. My question is, would it work if I solder an fcp connector to the board? and what is the most recommended liquid flux to be used?

=== Update (01/05/2018) ===

[image|1310861][image|1310857][image|1310853][image|1310851][image|1310858][image|1310856][image|1310850][image|1310854][image|1310849][image|1310855][image|1310848][image|1310847][image|1310846]
I had a problem while fixing my friends iphone 6, as the battery was a bad one, and it exploaded during the action. Luckily, only the sim card plastic tray was burnt as I was able to see in addition to the fcp connector of the screen and front camera as they got out of thir places. My question is, would it work if I solder an fcp connector to the board? and what is the most recommended liquid flux to be used?

=== Update (01/05/2018) ===

[image|1310861][image|1310857][image|1310853][image|1310851][image|1310858][image|1310856][image|1310850][image|1310854][image|1310849][image|1310855][image|1310848][image|1310847][image|1310846]

기기:

iPhone 6

현황:

open

원문 게시자: Nart Al-Sherqatli ,

제목:

Battery pry, is the board damaged?

본문:

Hello Everyone,

I had a problem while fixing my friends iphone 6, as the battery was a bad one, and it exploaded during the action. Luckily, only the sim card plastic tray was burnt as I was able to see in addition to the fcp connector of the screen and front camera as they got out of thir places. My question is, would it work if I solder an fcp connector to the board? and what is the most recommended liquid flux to be used?

기기:

iPhone 6

현황:

open