Skip to main content
도움말

원문 게시자: mayer ,

본문:

It should work, I've done it.  What you can't do is install a system from one to the other because of the difference in processors.  I have not done it using 10.6.6.  I'm just fishing here but I would start the G4 in Target mode and the MacBook from the original installation disk and go to the second screen pull down menu to Utilities > Disk Utility and see if it see the G4 drive.  If it does, then the problem is the 10.6.6.  You are correct on the G4, it most likely is the inverter (because you can see the desktop).  HERE'S THE FAST WAY TO FIX THAT:  [guide|3631]

현황:

open