주요 콘텐츠로 건너뛰기
도움말

원문 게시자: Andre De Guerin ,

텍스트:

Yea, this is a known "feature" and pretty sure that U2 if it is genuinely bad will also get hot when you attempt to charge . Ipads like many fruity devices detect the presence of specific resistances on the two data pins, if any one thing is wrong it won't charge.

Did read somewhere that if you've got a board with damaged pads on the digitizer its possible to get one with extended pins pre-cut at the factory to spec so you can micro-solder it in place as normal eg with solder paste and stencil.

The solvent used is quite important as plastic will deform and melt if you try acetone, MEK or anything like that.

현황:

open