주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

도움말

현재 버전 게시자: mayer (투표 내용) ,

제목:

How to fix a broken I/O board power cable socket?

텍스트:

I was following your repair guide [guide|6313] and completely removed the logic board. When installing the new logic board I reached the step 14 to remove the I/O board power cable from its socket. Unfortunately the socket broke off. Is there a way how to connect the cable with the logic board again?
 
Maybe soldering the cables directly to their target pin? Without proper connection of the socket, the battery cannot charge and the soundcard as well as 1 USB port are disconnected.
 
Here images of the broken part:
 
[image|1332984]
 
[image|1332985]
 
Here the image from your guide at Step_14, how it actually should look like:
 
[image|1332986]
[image|1332986]
 
=== Update (02/16/2018) ===
 
What do you think about this strategy?
 
1) Putting back the socket to its original location:
 
[image|1343793]
 
It still fits :-)
 
[image|1343794]
 
2) Filling the connection gaps by soldering:
 
[image|1343797]
 
Does this make sense?
Does this make sense?
Any tips on the type of solder?

기기:

MacBook Air 11" Mid 2011

현황:

open

승인된 답변:

463394

편집자: Ignaz Reicht ,

제목:

How to fix a broken I/O board power cable socket?

텍스트:

I was following your repair guide [guide|6313] and completely removed the logic board. When installing the new logic board I reached the step 14 to remove the I/O board power cable from its socket. Unfortunately the socket broke off. Is there a way how to connect the cable with the logic board again?
 
Maybe soldering the cables directly to their target pin? Without proper connection of the socket, the battery cannot charge and the soundcard as well as 1 USB port are disconnected.
 
Here images of the broken part:
 
[image|1332984]
 
[image|1332985]
 
Here the image from your guide at Step_14, how it actually should look like:
 
[image|1332986]

=== Update (02/16/2018) ===

What do you think about this strategy?

1) Putting back the socket to its original location:
[image|1343793]
It still fits :-)
[image|1343794]

2) Filling the connection gaps by soldering:
[image|1343797]

Does this make sense?
Any tips on the type of solder?
[image|1332986]

=== Update (02/16/2018) ===

What do you think about this strategy?

1) Putting back the socket to its original location:
[image|1343793]
It still fits :-)
[image|1343794]

2) Filling the connection gaps by soldering:
[image|1343797]

Does this make sense?
Any tips on the type of solder?

기기:

MacBook Air 11" Mid 2011

현황:

open

편집자: Ignaz Reicht ,

제목:

How to fix a broken I/O board power cable socket?

텍스트:

I was following your repair guide [guide|6313] and completely removed the logic board. When installing the new logic board I reached the step 14 to remove the I/O board power cable from its socket. Unfortunately the socket broke off. Is there a way how to connect the cable with the logic board again?
 
Maybe soldering the cables directly to their target pin? Without proper connection Iof the socket, the battery cannot charge and the batterysoundcard as well is the soundcard andas 1 USB port are disconnected.
Maybe soldering the cables directly to their target pin? Without proper connection Iof the socket, the battery cannot charge and the batterysoundcard as well is the soundcard andas 1 USB port are disconnected.
 
Here images of the broken part:
 
[image|1332984]
 
[image|1332985]
 
Here the image from your guide at Step_14, how it actually should look like:
 
[image|1332986]

기기:

MacBook Air 11" Mid 2011

현황:

open

편집자: Ignaz Reicht ,

제목:

How to fix a broken I/O board power cable socket?

텍스트:

I was following your repair guide [guide|6313] and completely removed the logic board. When installing the new logic board I reached the step 14 to remove the I/O board power cable from its socket. Unfortunately the socket broke off. Is there a way how to connect the cable with the logic board again?
 
Maybe soldering the cables directly to their target pin? Without proper connection I cannot charge the battery. Please help.battery as well is the soundcard and 1 USB port disconnected.

Here images of the broken part:
[image|1332984]
[image|1332985]

Here the image from your guide at Step_14, how it actually should look like:
[image|1332986]
Maybe soldering the cables directly to their target pin? Without proper connection I cannot charge the battery. Please help.battery as well is the soundcard and 1 USB port disconnected.

Here images of the broken part:
[image|1332984]
[image|1332985]

Here the image from your guide at Step_14, how it actually should look like:
[image|1332986]

기기:

MacBook Air 11" Mid 2011

현황:

open

원문 게시자: Ignaz Reicht ,

제목:

How to fix a broken I/O board power cable socket?

텍스트:

I was following your repair guide [guide|6313] and completely removed the logic board. When installing the new logic board I  reached the step 14 to remove the I/O board power cable from its socket. Unfortunately the socket broke off. Is there a way how to connect the cable with the logic board again?

Maybe soldering the cables directly to their target pin? Without proper connection I cannot charge the battery. Please help.

기기:

MacBook Air 11" Mid 2011

현황:

open