원문 게시자: Charley B ,
I have been having this issue with the original Pulse. It's possible they are built on a similar design, so YMMV. I upgraded the firmware on it (they are on the Pulse 3 and still released one, which was rather amazing). I installed it, and it helped immensely. But the problem came back yesterday. I did some troubleshooting, and it turns out that I was charging the speaker with an aftermarket cable. It didn't really make sense, but when I let it charge again using the original charger and cable, the problem is gone. Again, I don't know if this will help you, but maybe it's some built in safety mechanism that measures amps (it is a 2A charger), or faulty cables. Let it drain all the way out, then give it a good charge and see if it helps. Check your firmware just to be safe.