주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: Minho ,

본문:

Are you certain PP_GPU is shorted...it is a vey low resistance line so if you don't look at the measurement, you can be fooled by the continuity test. If you have a true short (0 Ohms), then it could either be the PMIC or the CPU, assuming none of the caps on the line are causing the short. I have seen several shorted CPU's recently on water damaged devices. In the end, I removed the CPU and measured it directly on chip to confirm.
 
EDIT
The voltages should all be on the PMIC page. Picture below is iPhone 6S.
[image|1409344]

현황:

open

원문 게시자: Minho ,

본문:

Are you certain PP_GPU is shorted...it is a vey low resistance line so if you don't look at the measurement, you can be fooled by the continuity test. If you have a true short (0 Ohms), then it could either be the PMIC or the CPU, assuming none of the caps on the line are causing the short. I have seen several shorted CPU's recently on water damaged devices. In the end, I removed the CPU and measured it directly on chip to confirm.

현황:

open