메인 컨텐츠로 가기
도움말

원문 게시자: oldnwstf ,

본문:

So, did you replace the eject mechanism gear?  You must also thoroughly lubricate the other gears and check that everything moves freely.

As the machine is almost 30 years old now, the floppy drive must usually be cleaned and relubricated to restore its proper function. All the rails and other moving stuff should be relubed..

Did you check that the head assembly can move freely on its rails? If not, you would need to put some lithium grease on it. This can also cause the grinding noise when the head is stuck and the actuator would try to move it.

Also the main motor can rub onto something underneath, which would cause grinding noises...

현황:

open