주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: Tobias Isakeit (투표 내용) ,

제목:

Pairing failure after LCD shift

본문:

I cracked my Apple Watch 2 screen and replaced it with a new on my own. However, after the screen shift, the watch fails pairing to any watch. I have tried it a hundred timed on five different iPhones but it always fails. What might have gone wrong? The display shift was easy and was done without apparent problems. Thankful for input!
I cracked my Apple Watch 2 screen and replaced it with a new on my own. However, after the screen shift, the watch fails pairing to any watch. I have tried it a hundred timed on five different iPhones but it always fails. What might have gone wrong? The display shift was easy and was done without apparent problems. Thankful for input!
 
=== Update (06/01/2018) ===
 
I read here that the only way to get the watch to work again is to ‘reflash new firmware by ibus 2...’:
 
http://forum.gsmhosting.com/vbb/f1023/pairing-failed-2301194/
 
Can anyone confirm that this is what needs to be done?

기기:

Apple Watch Series 2

현황:

open

중복:

487612

편집 작업: Martin Berggren ,

제목:

Pairing failure after LCD shift

본문:

I cracked my Apple Watch 2 screen and replaced it with a new on my own. However, after the screen shift, the watch fails pairing to any watch. I have tried it a hundred timed on five different iPhones but it always fails. What might have gone wrong? The display shift was easy and was done without apparent problems. Thankful for input!

=== Update (06/01/2018) ===

I read here that the only way to get the watch to work again is to ‘reflash new firmware by ibus 2...’:

http://forum.gsmhosting.com/vbb/f1023/pairing-failed-2301194/

Can anyone confirm that this is what needs to be done?
I cracked my Apple Watch 2 screen and replaced it with a new on my own. However, after the screen shift, the watch fails pairing to any watch. I have tried it a hundred timed on five different iPhones but it always fails. What might have gone wrong? The display shift was easy and was done without apparent problems. Thankful for input!

=== Update (06/01/2018) ===

I read here that the only way to get the watch to work again is to ‘reflash new firmware by ibus 2...’:

http://forum.gsmhosting.com/vbb/f1023/pairing-failed-2301194/

Can anyone confirm that this is what needs to be done?

기기:

Apple Watch Series 2

현황:

open

원문 게시자: Martin Berggren ,

제목:

Pairing failure after LCD shift

본문:

I cracked my Apple Watch 2 screen and replaced it with a new on my own. However, after the screen shift, the watch fails pairing to any watch. I have tried it a hundred timed on five different iPhones but it always fails. What might have gone wrong? The display shift was easy and was done without apparent problems. Thankful for input!

기기:

Apple Watch Series 2

현황:

open