주요 콘텐츠로 건너뛰기
도움말

원문 게시자: Abrsvc ,

텍스트:

Lines like this can be caused by poor connections on the cable that goes to the panel.  A reset won't usually "fix" this.  It is possible that there is a problem with the logic board, but lets start with the simple things first.

Open up the back and re-seat all of the cables.  Make sure that they are all connected properly and securely.

Update this with the results and we'll proceed based upon what any new symptoms occur.  Hopefully the re-seat will resolve the problem.

Dan

현황:

open