주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

도움말

현재 버전 게시자: Dan ,

텍스트:

Looks like you also have the same problem as [post|510634]!
 
Sadly your screen is failing! You’ll need to see if Apple will cover it under an extended warranty exception!
 
=== Update (08/23/2018) ===

'''UPDATE:''' Apple
'''Apple has had quite a few of these now, All of the Touch Bar 15” & Fn 13" & 15" have have this affliction.affliction'''. '''The 13” Touch Bar appears to be less effected!''' The T-CON board which sits between the heat exchangers within the main body can over heat damaging it. Either the fans have failed or the vents have be blocked so the system is staved of fresh cool air or the exhaust vents in the back are blocked by bedding. I've also seen dust build up as an issue.

'''UPDATE:''' Apple
'''Apple has had quite a few of these now, All of the Touch Bar 15” & Fn 13" & 15" have have this affliction.affliction'''. '''The 13” Touch Bar appears to be less effected!''' The T-CON board which sits between the heat exchangers within the main body can over heat damaging it. Either the fans have failed or the vents have be blocked so the system is staved of fresh cool air or the exhaust vents in the back are blocked by bedding. I've also seen dust build up as an issue.
 
If your warranty has expired you'll need a new display assembly as the T-CON board is part of the assembly.
 
If Apple has stuck with the older display design with the T-CON logic within the lid this wouldn't have been such an issue as the display area is much cooler.

현황:

open

편집자: Dan ,

텍스트:

Looks like you also have the same problem as [post|510634]!
 
Sadly your screen is failing! You’ll need to see if Apple will cover it under an extended warranty exception!
 
=== Update (08/23/2018) ===
 
'''UPDATE:''' Apple has had quite a few of these now, All of the Touch Bar & Fn 13" & 15" have this affliction. The T-CON board which sits between the heat exchangers within the main body can over heat damaging it. Either the fans have failed or the vents have be blocked so the system is staved of fresh cool air or the exhaust vents in the back are blocked by bedding. I've also seen dust build up as an issue.
 
If your warranty has expired you'll need a new display assembly as the T-CON board is part of the assembly.
 
If Apple has stuck with the older display design with the T-CON logic within the lid this wouldn't have been such an issue as the display area is much cooler.

현황:

open

원문 게시자: Dan ,

텍스트:

Looks like you also have the same problem as [post|510634]!

Sadly your screen is failing! You’ll need to see if Apple will cover it under an extended warranty exception!

현황:

open