Skip to main content
도움말

원문 게시자: Minho ,

본문:

The first thing to check is the condition of the battery. If you’re lucky, you may have only shorted the gas gauge circuitry on the battery (there is a circuit board inside the black wrapping). The way to test for this is to either replace the battery or if you have access to a multimeter, probe the battery connector to see if it shows any voltage. If it shows 0V, then the battery circuit was probably damaged. If it shows something like 3 - 4.2V, then the battery is fine and you probably blew something on the logic board. That would require a micro-soldering repair.

현황:

open