주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

도움말

현재 버전 게시자: Ritesh Barde ,

텍스트:

Hi dear
 
i am also on the way of doing the same for that i searched and purchased so many switches in market for replace hope it will work . If any update i will post shortly.
 
=== Update (09/21/2018) ===
Hey Don
 
Please send me another side photo of mother board in which broken switch seeing clearly
 
=== Update (09/25/2018) ===
Hey Don
 
Good news for you …! i find the solution of our problem . i assuming that your alert slider switch is damaged from one side i.e on silent mode position ok . then dont worry ,please open locking clip of the switch ,then remove sliding knob inspect carefully by using magnifier there is one copper connector in that knob check weather it is bend or what due to extreme pressing of slider switch. Then make it straight carefully and lift both sides then normal position and then carefully place it on the board at ring mode position means at down position which connects Pin 3 & 5 and lock it gently as previous , if that switch’s shell is broken than you might be use some epoxy adhesive to lock switch clip (Don’t use feviquick) and here it is done.
 
Finally after remounting board gently insert slider button be careful it should not touch switch knob and screw the packing . after getting done please stick your slider button with body with adhesive so that button should not hurt switch knob again ok .
 
So please try this to repair , i am sure it works 100% as i done practicle with my phone ( Please try this assembly with the help of expertise )
 
BEST OF LUCK.

현황:

open

편집자: Ritesh Barde ,

텍스트:

Hi dear
 
i am also on the way of doing the same for that i searched and purchased so many switches in market for replace hope it will work . If any update i will post shortly.
 
=== Update (09/21/2018) ===
Hey Don
 
Please send me another side photo of mother board in which broken switch seeing clearly

현황:

open

원문 게시자: Ritesh Barde ,

텍스트:

Hi dear

i am also on the way of doing the same for that i searched and purchased  so many switches in market for replace hope it will work . If any update i will post shortly.

현황:

open