주요 콘텐츠로 건너뛰기
도움말

원문 게시자: D Verh ,

본문:

Same problem here. Replaced AW S3 screen and cannot pair or update the watch. After days of googling and testing, here are the solutions I found (make sure your phone is running the latest IOS):[br]

[br]

—— Solution when you have your old screen that is working:[br]

- Touch screen doesn’t have to be working, only the lcd. Put back the old screen on your watch and pair it like usual. Then update the watch to OS5 and above. After that is done. Put the new screen fully on and unpair the watch (IMPORTANT!). After unpairing with the new screen, test if the watch pairs again after that. If it works, great job! [br]

- If it doesn’t work, try this: Attach the old screen like i mentioned above. Now try to pair the watch but stop once you reach the icloud log in screen. Do not continue and go back all the way until the watch unpairs automatically.  Now put the new screen on and try to pair again. The watch should pair and unpair with the new screen installed, even after a reset.[br]

[br]

—— Solution when you have your old screen but the screen is black:[br]

- Attach the two ribbons (closest to the digital crown) to the new display.  Attached the last ribbon (furthest from the crown) to the old display. BE CAREFULL WITH THE RIBBONS! Power on the watch and pair it like usual. Then update the watch to OS5 and above. After that is done. Put the new screen fully on and unpair the watch (IMPORTANT!). After unpairing with the new screen, test if the watch pairs again after that. If it works, great job! [br]

- If it doesn’t work, try this: Attach the old screen like i mentioned above. Now try to pair the watch again but stop once you reach the icloud log in screen. Do not continue and go back all the way until the watch unpairs automatically.  Now put the new screen on and try to pair again. The watch should pair and unpair with the new screen installed, even after a reset.[br]

[br]

—— Solution when you don’t have your old screen:[br]

- You can try to put the new screen on and stop by an Apple store. If you’re under warranty they might replace or repair your watch without even checking that the screen isn’t original. [br]

- You purchase a broken original screen from Ebay and try the solutions above. I never tried this before, but if you have the opportunity, please let us know.[br]

[br]

Please keep in mind: NEVER THROW AWAY YOUR OLD SCREEN! If the solution worked, you can pair and unpair like normally, even if you reset the watch. But I’m not sure if you are able to update because mine if up to date now. I’m also not sure if it works with different phones. If you keep your screen, you can always try the solution again once it fails in the future.[br]

[br]

Also I tested this using the automatic pairing feature as well as the pop-up I get on my iPhone once the AW has been reset. If the solutions above don’t work, try to do it again but pair the watch manually (with the code). [br]

[br]

[br]

[br]

현황:

open