주요 콘텐츠로 건너뛰기
도움말

원문 게시자: Dan ,

텍스트:

I suspect you used a spray cleaner on your screen and the liquid dripped under the bezel wetting the LVDS connector. Now you have a resistive short as the cleaner has dried but left a film of corrosion across the connection.

At this point you’ll need to try to clean the connections. To even get to the connector you’ll need to take the display fully off following this guide [guide|10951] with the display off slide the clutch cover off to expose the bottom of the display. Locate the LVDS cable connector carefully remove the cable so you can clean the connector.

[image|1668457]

If you can’t clean it then you’ll need a new screen [product|IF188-083]

현황:

open