주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

도움말

현재 버전 게시자: oldturkey03 ,

텍스트:

@john683 try this:
 
There are longer steps if the keys are new and those are the secondary ones.[br]
 
[br]
 
'''Steps to reprogram keys to a car they are already linked to:'''[br]
 
1. Press and hold the unlock key on a remote[br]
 
2. Insert key in ignition and turn to on (while still holding unlock)[br]
 
3. Hold unlock while in the on position for 2 seconds[br]
 
4. Turn key to off, remove from ignition and release button.[br]
 
[br]
 
Do this for each remote. Relink to seat positions (press and hold mem position #, then unlock button for 2 seconds and release both) and done. [br]
 
[br]
 
'''To program new remotes on a car never linked to previously:'''[br]
 
[br]
 
1. Take a key (valet key works best, put it into the ignition and turn the key to the "on" position, so the dashboard lights come on.[br]
 
2. Roll down the driver's side window (not required, but a good idea in case there's a problem).[br]
 
3. Exit the car and close the door.[br]
 
4. With a second key, physically lock the doors by turning the key clockwise (don't use a remote).[br]
 
5. Take the first remote to be programmed, press the unlock button. The lights will flash once. [br]
 
6. Wait 10 seconds and press the unlock button. The doors should unlock. That first transmitter is now programmed.[br]
 
[br]
 
'''***If you have only one key skip to step 16. Otherwise continue to step 7.***'''[br]
 
[br]
 
7. Lock the door again (physically) with the key, (not the remote) by turning clockwise.[br]
 
8. Press the unlock button two times with a '''one second interval in between''', the lights will flash with each button press for a total of two flashes. [br]
 
9. Wait 10 seconds and press the unlock button. The doors should unlock. The second transmitter is now programmed.[br]

[br]

'''***If
'''**If you have three keys proceed to step 10. Otherwise skip to step 16.***'''[br]

[br]

[br]

'''***If
'''**If you have three keys proceed to step 10. Otherwise skip to step 16.***'''[br]

[br]
10. Lock the door again (physically) with the key, (not the remote) by turning clockwise.[br]
 
11. Press the unlock button three times with a '''one second interval in between''', the lights will flash with each button press for a total of three flashes. [br]
 
12. Wait 10 seconds and press the unlock button. The doors should unlock. The third transmitter is now programmed.[br]
 
[br]
 
'''***If you have four keys proceed to step 13. Otherwise skip to step 16.***'''[br]
 
[br]
 
13. Lock the door again (physically) with the key, (not the remote) by turning clockwise.[br]
 
14. Press the unlock button four times with a '''one second interval in between''', the lights will flash with each button press for a total of four flashes. [br]
 
15. Wait 10 seconds and press the unlock button. The doors should unlock. The fourth transmitter is now programmed.[br]
 
[br]
 
16. Remove the key from the ignition.
 
from [https://www.audizine.com/forum/showthread.php/428047-How-to-program-your-Audi-flip-key-fob|here]
 
Of course there are a bunch of youtube videos as well as instructions [https://www.ebay.com/gds/How-to-Program-an-Audi-A4-Key-/10000000178627435/g.html|on here]

현황:

open

원문 게시자: oldturkey03 ,

텍스트:

@john683 try this:

There are longer steps if the keys are new and those are the secondary ones.[br]

[br]

'''Steps to reprogram keys to a car they are already linked to:'''[br]

1. Press and hold the unlock key on a remote[br]

2. Insert key in ignition and turn to on (while still holding unlock)[br]

3. Hold unlock while in the on position for 2 seconds[br]

4. Turn key to off, remove from ignition and release button.[br]

[br]

Do this for each remote. Relink to seat positions (press and hold mem position #, then unlock button for 2 seconds and release both) and done. [br]

[br]

'''To program new remotes on a car never linked to previously:'''[br]

[br]

1. Take a key (valet key works best, put it into the ignition and turn the key to the "on" position, so the dashboard lights come on.[br]

2. Roll down the driver's side window (not required, but a good idea in case there's a problem).[br]

3. Exit the car and close the door.[br]

4. With a second key, physically lock the doors by turning the key clockwise (don't use a remote).[br]

5. Take the first remote to be programmed, press the unlock button. The lights will flash once. [br]

6. Wait 10 seconds and press the unlock button. The doors should unlock. That first transmitter is now programmed.[br]

[br]

'''***If you have only one key skip to step 16. Otherwise continue to step 7.***'''[br]

[br]

7. Lock the door again (physically) with the key, (not the remote) by turning clockwise.[br]

8. Press the unlock button two times with a '''one second interval in between''', the lights will flash with each button press for a total of two flashes. [br]

9. Wait 10 seconds and press the unlock button. The doors should unlock. The second transmitter is now programmed.[br]

[br]

'''***If you have three keys proceed to step 10. Otherwise skip to step 16.***'''[br]

[br]

10. Lock the door again (physically) with the key, (not the remote) by turning clockwise.[br]

11. Press the unlock button three times with a '''one second interval in between''', the lights will flash with each button press for a total of three flashes. [br]

12. Wait 10 seconds and press the unlock button. The doors should unlock. The third transmitter is now programmed.[br]

[br]

'''***If you have four keys proceed to step 13. Otherwise skip to step 16.***'''[br]

[br]

13. Lock the door again (physically) with the key, (not the remote) by turning clockwise.[br]

14. Press the unlock button four times with a '''one second interval in between''', the lights will flash with each button press for a total of four flashes. [br]

15. Wait 10 seconds and press the unlock button. The doors should unlock. The fourth transmitter is now programmed.[br]

[br]

16. Remove the key from the ignition.

from [https://www.audizine.com/forum/showthread.php/428047-How-to-program-your-Audi-flip-key-fob|here]

Of course there are a bunch of youtube videos as well as instructions [https://www.ebay.com/gds/How-to-Program-an-Audi-A4-Key-/10000000178627435/g.html|on here]

현황:

open