메인 콘텐츠로 스킵하기
도움말

현재 버전 게시자: jekillen ,

본문:

I opened up the case and found the keyboard cable at a slight angle in the slot.
 
However, reseating it and closing the case up and starting showed no improvement.
 
Using electrical tape on the ribbon cable to seat it in the socket was a great
 
suggestion. The socket has a lever that has to be released to allow insertion
 
of the end of the cable. The lever is pressed back down into place when the
 
cable end is inserted properly. Attaching this cable IS difficult. I initially
 
had put a bit of a bend in it to get some pressure on it to get it guided into
 
place in the connector. I am aware that bending a ribbon cable is NOT a
 
good idea, but it seemed the only way to get some push on it in the direction
 
of seating.
 
There is another issue with the keyboard itself which may or may not be
 
important: There are 51 SHORT, TINY screws holding the keyboard onto
 
the top case. I managed to loose 2 of the screws. One may still be logded
 
inside of the exposed cavities inside the keys. Don’t know if I was able
 
to get it out by turning the machine over and bumping it against my towel
 
covered work table.

현황:

open

원문 게시자: jekillen ,

본문:

I opened up the case and found the keyboard cable at a slight angle in the slot.

Using electrical tape on the ribbon cable to seat it in the socket was a great

suggestion. The socket has a lever that has to be released to allow insertion

of the end of the cable. The lever is pressed back down into place when the

cable end is inserted properly. Attaching this cable IS difficult. I initially

had put a bit of a bend in it to get some pressure on it to get it guided into

place in the connector. I am aware that bending a ribbon cable is NOT a

good idea, but it seemed the only way to get some push on it in the direction

of seating.

There is another issue with the keyboard itself which may or may not be

important: There are 51 SHORT, TINY screws holding the keyboard onto

the top case. I managed to loose 2 of the screws. One may still be logded

inside of the exposed cavities inside the keys.  Don’t know if I was able

to get it out by turning the machine over and bumping it against my towel

covered  work table.

현황:

open