원문 게시자: Cory Osoria ,
Where does the board that the power button connects to plug in to? If it is the power board directly, great. If it goes somewhere else (like main board) this will work too but it becomes harder to pinpoint the problem. Anyway, what I do on this issue is, as much as possible, try to unplug all boards from the main except the “power button board" (and to make sure that the standby/on LED is plugged in too). If the TV turns on, good. Turn it back off, plug another board into the power (as much as you can one at a time). For example, if it is set up power > main > others plugged into main, then plug main into power and unplug everything from main. If it turns on, main is good and something else is bad. Keep going as much as you can until the TV stops turning on. If you have a multimeter and know what voltages parts should be reading, it is easier to 100% say what a problem is, but for new techs the above is what I tell people to do (it is easier to show than to type out so sorry if it is confusing).