주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

도움말

현재 버전 게시자: Felix Hahn ,

텍스트:

At least for the left ear there is an easier disassembly possible!
 
1) remove the side (its only connected with three clips). NO screws here (Jabra Evolve 65).
 
2) use a small screw driver to lift the hole over the pin (see details above) but do so by accessing the hole through the openings now accessible form the outside (see picture)
 
[image|1884396]
 
[image|1884395]
 
[image|1884391]
 
Using the approach of Christian Kjaer I also broke one pin. No way to open it that way.
 
I would think at least on a Jabra Evolve 65 the right ear (with mic) is also assembled without screws to hold the side lid.
 
Added some pictures for comment on how to fix a broken hinge with 3d printed part.i fixed my issue (see below)
Added some pictures for comment on how to fix a broken hinge with 3d printed part.i fixed my issue (see below)
 
[image|2183522]
 
[image|2183523]

현황:

open

편집자: Felix Hahn ,

텍스트:

At least for the left ear there is an easier disassembly possible!
 
1) remove the side (its only connected with three clips). NO screws here (Jabra Evolve 65).
 
2) use a small screw driver to lift the hole over the pin (see details above) but do so by accessing the hole through the openings now accessible form the outside (see picture)
 
[image|1884396]
 
[image|1884395]
 
[image|1884391]
 
Using the approach of Christian Kjaer I also broke one pin. No way to open it that way.
 
I would think at least on a Jabra Evolve 65 the right ear (with mic) is also assembled without screws to hold the side lid.
 
Using the approach of Christian Kjaer I also broke one pin. No wayAdded some pictures for comment on how to open it that wayfix a broken hinge with 3d printed part.
Using the approach of Christian Kjaer I also broke one pin. No wayAdded some pictures for comment on how to open it that wayfix a broken hinge with 3d printed part.
 
I would think at least on a Jabra Evolve 65 the right ear (with mic) is also assembled without screws to hold the side lid.[image|2183522]

[image|2183523]
I would think at least on a Jabra Evolve 65 the right ear (with mic) is also assembled without screws to hold the side lid.[image|2183522]

[image|2183523]

현황:

open

편집자: Felix Hahn ,

텍스트:

At least for the left ear there is an easier disassembly possible!
 
1) remove the side (its only connected with three clips). NO screws here (Jabra Evolve 65).
 
2) use a small screw driver to lift the hole over the pin (see details above) but do so by accessing the hole through the openings now accessible form the outside (see picture)
 
[image|1884396]
 
[image|1884395]
 
[image|1884391]
 
 
 
Using the approach of Christian Kjaer I also broke one pin. No way to open it that way.
 
I would think at least on a Jabra Evolve 65 the right ear (with mic) is also assembled without screws to hold the side lid.

현황:

open

원문 게시자: Felix Hahn ,

텍스트:

At least for the left ear there is an easier disassembly possible!

1) remove the side (its only connected with three clips). NO screws here (Jabra Evolve 65).

2) use a small screw driver to lift the hole over the pin (see details above) but do so by accessing the hole through the openings now accessible form the outside (see picture)

[image|1884396]

[image|1884395]

[image|1884391]

현황:

open