주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: Dan ,

텍스트:

Well not good ;-{
 
The T-CON is in trouble this is the part that sits inside of the main case. It’s located is a hotter part of the system between the two heat transfer fins of the heat sink. So any blockage in the vents (sides and back) can cause things to overheat.
 
[image|2050347]
 
To add to this running heavy video work can saturate the systems cooling system. I do strongly recommend getting a good thermal management app like [https://www.tunabellysoftware.com/tgpro/|TG Pro]
 
I’m not sure if you also have a display issue as well.
 
While you likely didn’t bang the system given what you stated. You may have caused a problem during your cleaning of your displays screen. I’ve seen a few systems damaged by cleaning liquid dripping down into the electrical connections. This is most of the time due to spraying the cleaningcleaner onto the glass and then wiping the screen. The better (safer) way is to spray the towel/cloth and then wiping the screen.
While you likely didn’t bang the system given what you stated. You may have caused a problem during your cleaning of your displays screen. I’ve seen a few systems damaged by cleaning liquid dripping down into the electrical connections. This is most of the time due to spraying the cleaningcleaner onto the glass and then wiping the screen. The better (safer) way is to spray the towel/cloth and then wiping the screen.
 
In either case the solution is the same replacing the display assembly [product|IF117-064-7] and here’s the guide [guide|123893]

현황:

open

편집자: Dan ,

텍스트:

Well not good ;-{
 
The T-CON is in trouble this is the part that sits inside of the main case. It’s located is a hotter part of the system between the two heat transfer fins of the heat sink. So any blockage in the vents (sides and back) can cause things to overheat. To

[image|2050347]

To
add to this running heavy video work can saturate the systems cooling system. I do strongly recommend getting a good thermal management app like [https://www.tunabellysoftware.com/tgpro/|TG Pro]
The T-CON is in trouble this is the part that sits inside of the main case. It’s located is a hotter part of the system between the two heat transfer fins of the heat sink. So any blockage in the vents (sides and back) can cause things to overheat. To

[image|2050347]

To
add to this running heavy video work can saturate the systems cooling system. I do strongly recommend getting a good thermal management app like [https://www.tunabellysoftware.com/tgpro/|TG Pro]
 
I’m not sure if you also have a display issue as well.
 
While you likely didn’t bang the system given what you stated. You may have caused a problem during your cleaning of your displays screen. I’ve seen a few systems damaged by cleaning liquid dripping down into the electrical connections. This is most of the time due to spraying the cleaning onto the glass and then wiping the screen. The better (safer) way is to spray the towel/cloth and then wiping the screen.
 
In either case the solution is the same replacing the display assembly [product|IF117-064-7] and here’s the guide [guide|123893]

현황:

open

원문 게시자: Dan ,

텍스트:

Well not good ;-{

The T-CON is in trouble this is the part that sits inside of the main case. It’s located is a hotter part of the system between the two heat transfer fins of the heat sink. So any blockage in the vents (sides and back) can cause things to overheat. To add to this running heavy video work can saturate the systems cooling system. I do strongly recommend getting a good thermal management app like [https://www.tunabellysoftware.com/tgpro/|TG Pro]

I’m not sure if you also have a display issue as well.

While you likely didn’t bang the system given what you stated. You may have caused a problem during your cleaning of your displays screen. I’ve seen a few systems damaged by cleaning liquid dripping down into the electrical connections. This is most of the time due to spraying the cleaning onto the glass and then wiping the screen. The better (safer) way is to spray the towel/cloth and then wiping the screen.

In either case the solution is the same replacing the display assembly [product|IF117-064-7] and here’s the guide [guide|123893]

현황:

open