주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: Dan ,

텍스트:

-Apples blade SSD socket is not M.2 compliant, so your card won’t work without an adapter. Then to add to it the systems firmware is expecting a SSD not something else so you would need to dig into the firmware (are you a coder?) Then lets say you got that far. You still need to mount the units outputs (4 contacts on left?) You also won’t be able to get to the switch block once you put things back together. Now the software side the needed driver and then the app.
+Apples blade SSD socket is not M.2 compliant, so your card won’t work without an adapter. Then to add to it the systems firmware is expecting a SSD not something else so you would need to dig into the firmware (are you a coder?)
+
+Then lets say you got that far. You still need to mount the units outputs (4 contacts on left?) You also won’t be able to get to the switch block once you put things back together. Now the software side the needed driver and then the app.
There are easier ways which you can do externally.

현황:

open

편집자: Dan ,

텍스트:

-Apples blade SSD’s socket is not M.2 compliant so your card won’t work without an adapter. Then to add to it the systems firmware is expecting a SSD not something else so you would need to dig into the firmware (are you a coder?) Then lets say you got that far. You still need to mount the units outputs (4 contacts on left?) You also won’t be able to get to the switch block once you put things back together. Now the software side the needed driver and then the app.
+Apples blade SSD socket is not M.2 compliant, so your card won’t work without an adapter. Then to add to it the systems firmware is expecting a SSD not something else so you would need to dig into the firmware (are you a coder?) Then lets say you got that far. You still need to mount the units outputs (4 contacts on left?) You also won’t be able to get to the switch block once you put things back together. Now the software side the needed driver and then the app.
There are easier ways which you can do externally.

현황:

open

원문 게시자: Dan ,

텍스트:

Apples blade SSD’s socket is not M.2 compliant so your card won’t work without an adapter. Then to add to it the systems firmware is expecting a SSD not something else so you would need to dig into the firmware (are you a coder?) Then lets say you got that far. You still need to mount the units outputs (4 contacts on left?) You also won’t be able to get to the switch block once you put things back together. Now the software side the needed driver and then the app.

There are easier ways which you can do externally.

현황:

open