주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

도움말

현재 버전 게시자: John ,

제목:

DS lite turns off when digitizer is touched?

텍스트:

I have a DS lite that I replaced the upper LCD on. It turned on fine once i had the shell back together, and the start up screen loaded, but when i touch the bottom screen at any point the whole unit shuts down. If i dont touch the digitizer it will remain on and power on/off normally. The only problem occurs when you touch the digitizer.

I was kind of at a loss as to what to do so i checked/cleaned  ribbon cables, replaced the Fuses and even the L2 inductor, but still have the same problem. I have all the parts and tools required to do repairs, but I'm new to DS's and cant find anything on this.

Anyone have any recomendations?

기기:

Nintendo DS Lite

현황:

open

승인된 답변:

65848

원문 게시자: John ,

제목:

DS lite turns off when digitizer is touched?

텍스트:

I have a DS lite that I replaced the upper LCD on. It turned on fine once i had the shell back together, and the start up screen loaded, but when i touch the bottom screen at any point the whole unit shuts down. If i dont touch the digitizer it will remain on and power on/off normally. The only problem occurs when you touch the digitizer.

I was kind of at a loss as to what to do so i checked/cleaned  ribbon cables, replaced the Fuses and even the L2 inductor, but still have the same problem. I have all the parts and tools required to do repairs, but I'm new to DS's and cant find anything on this.

Anyone have any recomendations?

기기:

Nintendo DS Lite

현황:

open