주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: Dan ,

텍스트:

As long as they are both Unibody systems! You can’t use a Retina display on a Unibody.
-The 2012 systems use a slightly different LVDS connector.
+Be aware the 2012 systems use a slightly different LVDS connector!
-Most people are placing the 2011 15” hi-res matte or gloss displays onto their 2012 system here the LVDS cable tang needs to be ground down a bit, so it can fit. If done correctly there is no issues.
+Most people are placing the 2011 15” hi-res matte or gloss displays onto their 2012 system. Here the LVDS cable tang needs to be ground down a bit, so it can fit. If done correctly there is no issues.
'''Here you’re doing the reverse!''' The 2012 display LVDS cable is a bit smaller so make sure you’ve centered the cable in the connector otherwise you risk shorting out!
Frankly, I don’t think its wise as you could damage your logic board and the display! The 2011 & 2012 displays are no different otherwise!

현황:

open

원문 게시자: Dan ,

텍스트:

As long as they are both Unibody systems! You can’t use a Retina display on a Unibody.

The 2012 systems use a slightly different LVDS connector.

Most people are placing the 2011 15” hi-res matte or gloss displays onto their 2012 system here the LVDS cable tang needs to be ground down a bit, so it can fit. If done correctly there is no issues.

'''Here you’re doing the reverse!''' The 2012 display LVDS cable is a bit smaller so make sure you’ve centered the cable in the connector otherwise you risk shorting out!

Frankly, I don’t think its wise as you could damage your logic board and the display! The 2011 & 2012 displays are no different otherwise!

현황:

open