주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

도움말

현재 버전 게시자: Terry Page ,

텍스트:

The[image|2396769]The so called “fuse” is very difficult to bridge with solder or a wire and when I tried it the result was to destroy one end of the fuse making it impossible to bridge. Luckily I found out that one side of the battery(the positive) is connected to one side of the fuse and the other side is connected to a nearby small pad which makes it easier to bridge. I enclose a picture of what I did…hope it helps.
The[image|2396769]The so called “fuse” is very difficult to bridge with solder or a wire and when I tried it the result was to destroy one end of the fuse making it impossible to bridge. Luckily I found out that one side of the battery(the positive) is connected to one side of the fuse and the other side is connected to a nearby small pad which makes it easier to bridge. I enclose a picture of what I did…hope it helps.
 
This fix is for the right joycon but I guess the left joycon has something similar which an ohmeter can discover….

현황:

open

원문 게시자: Terry Page ,

텍스트:

The  so called  “fuse” is very difficult to bridge with solder or a wire and  when I tried it the result was to destroy one end of the fuse making it impossible to bridge. Luckily I found out  that one side of the battery(the positive) is connected to one side of the fuse and the other side is connected to a nearby small pad which makes it easier to bridge. I enclose a  picture of what I did…hope it helps.

This fix is for the right joycon but  I guess the left joycon has something similar which an ohmeter can discover….

현황:

open