주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: Cheap gamer ,

제목:

Black screen after cleaning and reassemblingm - RESOLVED

텍스트:

A friend of mine gave me a gl552vw that she wasn't using after my lenovo died. I disassembled it to clean it properly and to remove all the little inhabitants and apply new thermal paste. After reassembling it, all I get is a black screen. I was careful not to damage anything but the lid sensor broke off the board anyway. Do you guys think I might have damaged the lcd cable during reassembly or could the little inhabitants have done something inside it
+
+
+
+edit: new issue discovered that i thought was normal. it turns on as soon as i plug in the charger

기기:

Asus Rog GL55VW-DH71

현황:

open

편집자: jayeff ,

제목:

-Black screen after cleaning and reassembling
+Black screen after cleaning and reassemblingm - RESOLVED

텍스트:

A friend of mine gave me a gl552vw that she wasn't using  after my lenovo died.  I disassembled it to clean it properly and to remove all the little inhabitants and apply new thermal paste.  After reassembling it, all I get is a black screen.  I was careful not to damage anything but the lid sensor broke off the board anyway.   Do you guys think I might have damaged the lcd cable during reassembly or could the little inhabitants have done something inside it

기기:

Asus Rog GL55VW-DH71

현황:

open

편집자: Cheap gamer ,

제목:

-Black screen after cleaning and applying new thermal paste
+Black screen after cleaning and reassembling

텍스트:

A friend of mine gave me a gl552vw that she wasn't using  after my lenovo died.  I disassembled it to clean it properly and to remove all the little inhabitants and apply new thermal paste.  After reassembling it, all I get is a black screen.  I was careful not to damage anything but the lid sensor broke off the board anyway.   Do you guys think I might have damaged the lcd cable during reassembly or could the little inhabitants have done something inside it

기기:

Asus Rog GL55VW-DH71

현황:

open

원문 게시자: Cheap gamer ,

제목:

Black screen after cleaning and applying new thermal paste

텍스트:

A friend of mine gave me a gl552vw that she wasn't using  after my lenovo died.  I disassembled it to clean it properly and to remove all the little inhabitants and apply new thermal paste.  After reassembling it, all I get is a black screen.  I was careful not to damage anything but the lid sensor broke off the board anyway.   Do you guys think I might have damaged the lcd cable during reassembly or could the little inhabitants have done something inside it

기기:

Asus Rog GL55VW-DH71

현황:

open