steve watts, I believe that the Mini E10i uses a micro usb port. It is soldered on the logic board. In order to change it you will have to solder very small pieces in a very small place. So, if you have not done such thing before, you will need to practice this first. The part is available at places [http://stellatech.com/sony-ericsson-x2-mini-x10-x10i-vivaz-micro-usb-connector,a,en,809142.html|like this.] To see how your phone is disassembled, check on the [guide|3124|ifixit teardown.|page=2] Hope this helps, good luck.
+
steve watts, the Mini E10i uses a micro usb port. It is soldered on the logic board. In order to change it you will have to solder very small pieces in a very small place. So, if you have not done such thing before, you will need to practice this first. The part is available at places [http://stellatech.com/sony-ericsson-x2-mini-x10-x10i-vivaz-micro-usb-connector,a,en,809142.html|like this.] To see how your phone is disassembled, check on the [guide|3124|ifixit teardown.|page=2] Hope this helps, good luck.
steve watts, I believe that the Mini E10i uses a micro usb port. It is soldered on the logic board. In order to change it you will have to solder very small pieces in a very small place. So, if you have not done such thing before, you will need to practice this first. The part is available at places [http://stellatech.com/sony-ericsson-x2-mini-x10-x10i-vivaz-micro-usb-connector,a,en,809142.html|like this.] To see how your phone is disassembled, check on the [guide|3124|ifixit teardown.|page=2] Hope this helps, good luck.