Skip to main content
도움말

현재 버전 게시자: oldturkey03 (투표 내용) ,

제목:

What causes graphics to change colors and flicker?

본문:

MacBook Pro 15 A1286 2.53 Mid-2010

I have taken the back cover off of my MacBook Pro and if I apply pressure to the logic board in certain spots, the graphics return to normal.  I'm assuming there is a loose or bad solder connection somewhere, but does anyone know WHERE on the logic board I should look for such an issue?  Any tips for troubleshooting this is greatly appreciated seeing as this is a real butt kicker right now!  Thanks in advance!

기기:

MacBook Pro 15" Unibody Mid 2010

현황:

open

승인된 답변:

87870

편집 작업: mayer ,

제목:

What causes graphics to change colors and flicker?

본문:

MacBook Pro 15 A1286 2.53 Mid-2010
 
I have taken the back cover off of my MacBook Pro and if I apply pressure to the logic board in certain spots, the graphics return to normal. I'm assuming there is a loose or bad solder connection somewhere, but does anyone know WHERE on the logic board I should look for such an issue? Any tips for troubleshooting this is greatly appreciated seeing as this is a real butt kicker right now! Thanks in advance!

기기:

MacBook Pro 15 A1286 2.53 Mid-201015" Unibody Mid 2010
MacBook Pro 15 A1286 2.53 Mid-201015" Unibody Mid 2010

현황:

open

편집 작업: mayer ,

제목:

What causes graphics to change colors and flicker?

본문:

MacBook Pro 15 A1286 2.53 Mid-2010
I have taken the back cover off of my MacBook Pro and if I apply pressure to the logic board in certain spots, the graphics return to normal. I'm assuming there is a loose or bad solder connection somewhere, but does anyone know WHERE on the logic board I should look for such an issue? Any tips for troubleshooting this is greatly appreciated seeing as this is a real butt kicker right now! Thanks in advance!

기기:

MacBook Pro 15 A1286 2.53 Mid-2010

현황:

open

편집 작업: originalmachead ,

제목:

What causes graphics to change colors and flicker?

본문:

I have taken the back cover off of my MacBook Pro and if I apply pressure to the logic board in certain spots, the graphics return to normal.  I'm assuming there is a loose or bad solder connection somewhere, but does anyone know WHERE on the logic board I should look for such an issue?  Any tips for troubleshooting this is greatly appreciated seeing as this is a real butt kicker right now!  Thanks in advance!

기기:

MacBook Pro 15 A1286 2.53 Mid-2010

현황:

open

원문 게시자: august ,

제목:

What causes graphics to change colors and flicker?

본문:

I have taken the back cover off of my MacBook Pro and if I apply pressure to the logic board in certain spots, the graphics return to normal.  I'm assuming there is a loose or bad solder connection somewhere, but does anyone know WHERE on the logic board I should look for such an issue?  Any tips for troubleshooting this is greatly appreciated seeing as this is a real butt kicker right now!  Thanks in advance!

기기:

MacBook Pro 15 A1286 2.53 Mid-2010

현황:

open