you can find both the ipad 1, 2 , 3 digitizer and LCD FPC connector here
we also do this repair service.
[http://www.cyberdoctormd.com/ipad-1/]
+
[image|169959]
+
== Update ==
With the mylar tape, you are really just putting bandage on a broken connector.
Depends on how you break your connector and if you bend your pins off tack or not applying external pressure from tape may or may not bring back the touch function with dead spots.
-
Any strong tape would work really, just don’t use conductive tape that will short out your board. You will have to open the ipad and redo the whole thing again and again over time and hope it still works, because over time the tape can lose strength holding the flat ribbon connector down. The way you shake your ipad from normal usage can also let the tape lose hence undone the touch screen. soldering and replacement of the FPC connector is really the only lasting fix. Its not that hard ro expensive to get it replaced. See [http://www.youtube.com/watch?feature=player_embedded&v=H13hhi4v-vQ|youtube video]how to take your FPC old connector off. 20$ if you do it yourself.
+
Any strong tape would work really, just don’t use conductive tape that will short out your board. You will have to open the ipad and redo the whole thing again and again over time and hope it still works, because over time the tape can lose strength holding the flat ribbon connector down. The way you shake your ipad from normal usage can also let the tape lose hence undone the touch screen. soldering and replacement of the FPC connector is really the only lasting fix. Its not that hard ro expensive to get it replaced. See [http://www.youtube.com/watch?feature=player_embedded&v=H13hhi4v-vQ|youtube video]how to take your FPC old connector off. 20$ if you do it yourself.
[http://www.cyberdoctormd.com/repair-services-ipod-iphone-ipad-mac-pc/|And you can get connector repaired here for less than 99$]
you can find both the ipad 1, 2 , 3 digitizer and LCD FPC connector here
we also do this repair service.
[http://www.cyberdoctormd.com/ipad-1/]
-
== Update ==
+
== Update ==
-
With the mylar tape, you are really just putting bandage on a broken connector.
-
-
+
With the mylar tape, you are really just putting bandage on a broken connector.
Depends on how you break your connector and if you bend your pins off tack or not applying external pressure from tape may or may not bring back the touch function with dead spots.
+
Any strong tape would work really, just don’t use conductive tape that will short out your board. You will have to open the ipad and redo the whole thing again and again over time and hope it still works, because over time the tape can lose strength holding the flat ribbon connector down. The way you shake your ipad from normal usage can also let the tape lose hence undone the touch screen. soldering and replacement of the FPC connector is really the only lasting fix. Its not that hard ro expensive to get it replaced. See [http://www.youtube.com/watch?feature=player_embedded&v=H13hhi4v-vQ|youtube video ]how to take your FPC old connector off. 20$ if you do it yourself.
-
-
Any strong tape would work really, just don’t use conductive tape that will short out your board. You will have to open the ipad and redo the whole thing again and again over time and hope it still works, because over time the tape can lose strength holding the flat ribbon connector down. The way you shake your ipad from normal usage can also let the tape lose hence undone the touch screen. soldering and replacement of the FPC connector is really the only lasting fix. Its not that hard ro expensive to get it replaced. See youtube video how to take your FPC old connector off. 20$ if you do it yourself.
-
-
-
-
And you can get connector repaired here for less than 99$
+
[http://www.cyberdoctormd.com/repair-services-ipod-iphone-ipad-mac-pc/|And you can get connector repaired here for less than 99$]
you can find both the ipad 1, 2 , 3 digitizer and LCD FPC connector here
we also do this repair service.
[http://www.cyberdoctormd.com/ipad-1/]
+
+
== Update ==
+
+
With the mylar tape, you are really just putting bandage on a broken connector.
+
+
+
+
Depends on how you break your connector and if you bend your pins off tack or not applying external pressure from tape may or may not bring back the touch function with dead spots.
+
+
+
+
Any strong tape would work really, just don’t use conductive tape that will short out your board. You will have to open the ipad and redo the whole thing again and again over time and hope it still works, because over time the tape can lose strength holding the flat ribbon connector down. The way you shake your ipad from normal usage can also let the tape lose hence undone the touch screen. soldering and replacement of the FPC connector is really the only lasting fix. Its not that hard ro expensive to get it replaced. See youtube video how to take your FPC old connector off. 20$ if you do it yourself.
+
+
+
+
And you can get connector repaired here for less than 99$
CyberDoc here
you can find both the ipad 1, 2 , 3 digitizer and LCD FPC connector here
we also do this repair service.
[http://www.cyberdoctormd.com/ipad-1/]