주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: Andrew Optimus Goldheart ,

제목:

Why does airport card crash the computer?

텍스트:

I replaced my logic board and then also had to replace a hard drive that was having a hard time booting up.  When I went to start up after finishing-nothing, no power.  I thought i had not connected the power on the logic board properly so I took apart and this time started up fine while still disassembled. It turns out that when the airport card is in-no power.  If the machine is running and I plug airport in-power is zapped!  A little magnet had been stuck in the airport slot and some of the connectors had been bent and were touching.  I straightened them but no success.  Is there a way to know if the card is bad--it worked fine before the new hard drive-even with the new logic board installed?  I do not want to buy a new card if it is somehting else.  Thanks for your help

기기:

-iBook G3 12" A1005 900MHz
+iBook G3 12"

현황:

open

승인된 답변:

101205

편집자: oldturkey03 (투표 내용) ,

제목:

Why does airport card crash the computer?

텍스트:

I replaced my logic board and then also had to replace a hard drive that was having a hard time booting up.  When I went to start up after finishing-nothing, no power.  I thought i had not connected the power on the logic board properly so I took apart and this time started up fine while still disassembled. It turns out that when the airport card is in-no power.  If the machine is running and I plug airport in-power is zapped!  A little magnet had been stuck in the airport slot and some of the connectors had been bent and were touching.  I straightened them but no success.  Is there a way to know if the card is bad--it worked fine before the new hard drive-even with the new logic board installed?  I do not want to buy a new card if it is somehting else.  Thanks for your help

기기:

iBook G3 12" A1005 900MHz

현황:

open

승인된 답변:

+101205

편집자: originalmachead ,

제목:

Why does airport card crash the computer?

텍스트:

I replaced my logic board and then also had to replace a hard drive that was having a hard time booting up.  When I went to start up after finishing-nothing, no power.  I thought i had not connected the power on the logic board properly so I took apart and this time started up fine while still disassembled. It turns out that when the airport card is in-no power.  If the machine is running and I plug airport in-power is zapped!  A little magnet had been stuck in the airport slot and some of the connectors had been bent and were touching.  I straightened them but no success.  Is there a way to know if the card is bad--it worked fine before the new hard drive-even with the new logic board installed?  I do not want to buy a new card if it is somehting else.  Thanks for your help

기기:

iBook G3 12" A1005 900MHz

현황:

open

원문 게시자: ndwig ,

제목:

Why does airport card crash the computer?

텍스트:

I replaced my logic board and then also had to replace a hard drive that was having a hard time booting up.  When I went to start up after finishing-nothing, no power.  I thought i had not connected the power on the logic board properly so I took apart and this time started up fine while still disassembled. It turns out that when the airport card is in-no power.  If the machine is running and I plug airport in-power is zapped!  A little magnet had been stuck in the airport slot and some of the connectors had been bent and were touching.  I straightened them but no success.  Is there a way to know if the card is bad--it worked fine before the new hard drive-even with the new logic board installed?  I do not want to buy a new card if it is somehting else.  Thanks for your help

기기:

iBook G3 12" A1005 900MHz

현황:

open