주요 콘텐츠로 건너뛰기

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1500 질문 전체 보기
질문 마감됨

iPhone won't charge. "This accessory is not supported"

Hi everyone. My iPhone 3gs won't charge fast enough.

Every time I plug in my iphone 3gs to charge, it keeps getting the error message: "This accessory is not optimized for this iPhone". And even when it does charge, it will have that message, and it takes 30 minutes just to charge up 5% of the battery

What I have done=

-Replaced Charging port 2x with brand new parts (Mengtor & Wireless parts inc)

-Cleaned the board and all chips and possible connections with isopropyl Alcohol.

-Used many MANY different chargers (Wall, Car, Docks, Firewire, etc etc)

-Hard resets

And none of them have worked!! Any help guys?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글 2개:

Have you tried a new Apple sync cable? I have multiple cables that give me the same error.

The3gs is sensitive to cheap cables. I had one blow from a car charger I bought off eBay. The power management ic is prob bad. Possible to switch yourself if you feel up to the task. If not just take it to a repair shop

댓글 달기

답변 2개

I have heard from several repair shops that the 3GS & first-gen iPad are extremely sensitive to 3rd party cables, so.. best bet is to get a new Apple sync cable.

해당 답변은 도움이 되었습니까?

점수 0

댓글 3개:

I have. Bought 2 from the actual Apple store. D:

@Alex Nguyen, did the new cables work?

I second Nick27's answer. Forgot about the Power Management IC...

Seems to me that car chargers are harmful to the 3GS, unless its a reputable one.

댓글 달기

Try Different usb cables

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

already suggested....

댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 8,989