주요 콘텐츠로 건너뛰기

The PlayStation 3 (or commonly known as the PS3) is the third home computer entertainment system produced by Sony Computer Entertainment, and the successor to the PlayStation 2. It was released November 11, 2006

780 질문 전체 보기
질문 마감됨

use flux or not?

I'm reflowing my PS3 with the YLOD kit. Several videos on the net of how to reflow the PS3 suggest you use liquid flux on the chips before before reflowing the solder. Should I use the flux before heating the motherboard at all, or after heating the entire thing on low and before laying it flat and focusing the gun on the chips. Thanks.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

선택된 답변

In general I apply flux as soon as I begin to apply heat, unless using a preheater in which case I wait a few minutes while it warms up.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기
가장 유용한 답변

Always use flux before heating or warming up! This way the liquid flux is abosrbed when the reflow has begun.

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기
조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 3

전체 시간: 2,249