Model A1311 / Mid 2010 / 3.06 & 3.2 GHz Core i3 or 3.6 GHz Core i5 Processor

294 질문 전체 보기

Display doesn't work after changing HD

I pull out the Video cable by accident when I upgrading my HD. I did put it back but now my display doesn't work. it stays black. I connected my iMac with external monitor, it does work properly. So what's the problem is ? the Video cable ? or the socket ?


답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

1개의 답변

선택된 해법

Couldn't tell from your question ... perhaps you'll have to use a magnifier and see if you pulled the connector off the logic board, or damaged the connector.

If this answer was helpful please remember to return and mark it Accepted.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

RockeT 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 470