주요 콘텐츠로 건너뛰기

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1500 질문 전체 보기
질문 마감됨

Replaced battery, no charge, no reception, no wifi

So I just replaced my dying battery with a new one only to notice it wouldn't keep a charge (works only when connected to power outlet and shuts down when disconnected).

There's no service or wifi as well.

I double checked and tested all the connections and when I replace the new battery with my old one (which still has some juice left) everything works fine.

So I'm quite sure this isn't a connection problem.

But what is it? Is it the new battery not working correctly?

I was expecting this to be easier and more troublefree than it is now.

Thank you for your help.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

Have you found out anything else? Did you resolve your issue?

I just replaced the battery in a 3gs ... most cautiously without doing any visible damage under magnification.

Fully assembled:

- not charging

- doesn't respond to power button

- no wifi???

Redid all the steps. Same.

Update

I'm still waiting on new exchange battery. Phone has been fine on original battery.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

To update.

I opened the phone back up for the third time, inspected everything under magnification (no damage, dust, ... whatsoever) and put the original battery back in.

- power button works

- wifi is on and usable

- it charges

So must have received a bum battery ?

Or a battery with some bum little circuit board on it?

댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 607