주요 콘텐츠로 건너뛰기

Model No. A1367 / 8, 16, 32, or 64 GB capacity

915 질문 전체 보기
질문 마감됨

After screen replacement, screen don't turn on and device gets hot.

I have replaced some iPod touch screens in the past, all successfully. But this last one, when I tried to turn it on, it didn't show anything on screen, so I re-opened it to find that it gets very hot in the section below the front camera.

Also, iTuenes don't recognize it.

Can somebody help please?

Thanks.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

got very hot below the front camera? perhaps the logic board got heated. check it

해당 답변은 도움이 되었습니까?

점수 0

댓글 8개:

This is the place that gets hot: http://imgur.com/YSxTK

yes, that's what i thought, it's CPU there. how long have you used it? your lcd is newly replace and no problem right?

Yeah, its a new lcd. But it doesn't turn on.

can you check out is it the problem with you logic board or your new lcd?

It's not the lcd, because the old screen neither turns on.

댓글 3개 더보기

댓글 달기

I've had this in the past with iPod's that suffer from water damage. I most cases the chip that handles the display functionalities got fried due to the water spill.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

Nope, no water spill in this iPod. The only thing I did is replace the broken screen.

댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 866