Skip to main content

2009년 중반기 모델 A1278 / 2.26 or 2.53 GHz Core 2 Duo 프로세서 EMC 2326

867 질문 전체 보기

Burned my Airport and Bluetooth while replacing SuperDrive with HD

So, here is what happened last week. I received my HD Caddy to replace my SuperDrive with my HDD to use SSD as a main and HDD as a slave.

All being said, I did the installation successfully but WIFI stopped working "NO WIFI HARDWARE", bluetooth and ISight too. Took it to an Authorised Apple Reseller Service Centre (Not Apple) and after diagnosing the macbook pro they reported that the component WIFI along with Bluetooth and iSight are burned. Therefore, they have to replace the Logic Board and the Display in order to fix them.

The quote price was more than 1500$ which I think not worth it. However, what if I want to fix the WIFI only? do I still have to fix bluetooth and iSight in order for the WIFI to get fixed? In other words, is Airport linked to Bluetooth and iSight? hardware speaking.


I think what caused them to burn is that I forgot to unplug the battery before doing the installation but I did in the middle. Well, I learned the hard way :/ .

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

1개의 답변

선택된 해법

According to the manual, camera cable is connected to the AirPort card.

I think If AirPort card is down, iSight would also fail since it cannot send back anything to the logic board. If iSight remains untouched, changing the wifi should bring both of them back.

I also found Replacing iSight/Bluetooth/Wifi (cable only), which the camera cable and/or its connector causes the AirPort malfunctioning. You might want to check them too.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Mohammad Fadin 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 1,938