주요 콘텐츠로 건너뛰기

Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.

250 질문 전체 보기

Solid Red Screen after digitizer replacment

After a digitizer replacement the LCD is solid red see photo. I tried another LCD same issue, so its clearly something on the board/connector but it was not like this before the repair.

Any help is appreciated.

https://www.dropbox.com/s/748sx9qb1gtp7o...

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 4개

선택된 답변

It's some sort of loose cable. I've had the exact same thing happen to me after my ipad2 experienced a slight drop on the floor.

(You can still see things on the screen, but the red pattern is still always sort of there in the background, right?)

Anyways, I read about this happening to other people online (try googling it) and the solution suggested one place, was to punch the back of the iPad.

I turned it around, gave it a good solid couple of whacks, and it fixed the problem, works fine now.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

You most likely picked up a defective LCD. You can always try a hard reset, if it doesn't change anything this is probably the issue.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

The LCD was fine before the glass replacement. I tried a known good LCD and the iPad had the same issue. I still would like to know what causes this

댓글 달기

Ha! worked punching in the back

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

check the chips and component around he LCD connector,,,,,use magnifying classes

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Kyle 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,597