주요 콘텐츠로 건너뛰기

Model no. ML-2510, monochrome laser printer

13 질문 전체 보기

ceramic fuse is blowing in power supply board

Samsung ML2510 printer.Has power supply board JC44-101A.Looks black thermistor burn beside ceramic fuse.what case?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 1개

Anyway you could post an image of the board, in particular the area that looks burned?

댓글 달기

답변 1개

선택된 답변

Check for short after fuse. Voltage dependent device (if fitted, a blue flat disc size of 1p coin) will go short, as can the bridge rectifier or the smoothing capacitors.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Sam Patel 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,788