주요 콘텐츠로 건너뛰기

5세대 iPhone. 수리는 간단하며 스크루드라이버, 비집는 도구 그리고 인내가 필요합니다. GSM/CDMA / 16, 32, 또는 64 GB / 검정색 또는 흰색.

3009 질문 전체 보기

Repaired display stopped working after a small drop, causes?

I repaired my 4s screen a couple weeks ago from a cracked screen, and everything was working fine. The other day, I dropped it from a few feet and then the display and touchscreen stopped working. The phone still turns on and I can hear it vibrating and it rings when I get calls. Do you think it could be as simple as a connector coming undone,or will I have to order a new display assembly? Also, I may be wrong, but I think the microphone may have stopped working too--when I activate Siri, it makes the end noise before I can say anything.

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글:

what probably happened was that the way it landed because IPhones have sensitive spots and maybe it fell on one of them.

의 답변

의견 추가하세요

안드로이드 수리 키트

A new screen or battery is one kit away.

지금 장보기

안드로이드 수리 키트

A new screen or battery is one kit away.

지금 장보기

2개의 답변

가장 유용한 답변

Yes, check and carefully re-seat the connectors, reseat all of them to see if you can get Siri working too.

해당 답변은 도움이 되었습니까?

점수 2

댓글:

I would also try a hard reset first.

의 답변

의견 추가하세요

The connector has come dislodged from the board. Some ofd the after market parts don't snap down really good and they do not have the foam pads that the other connections do. This leaves a little room between the connector and the emi shield allowing the connector to pop loose. I started installing a foam shim on top of the new lcd/ digitizer connections and have not had this issue since.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Alec Martschenko 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 493