주요 콘텐츠로 건너뛰기

모델 M6497 또는 A1005 / 500, 600, 700, 800, 또는 900 MHz G3 processor

117 질문 전체 보기

os x install won't recognize newly installed 160gb hard drive

I just installed a new hard drive, Western Digital 160 GB Scorpio Blue PATA 5400 RPM 8 MB Cache Bulk/OEM Notebook Hard Drive WD1600BEVE.

I used the ifixit DYI.

However, when attempting to install os 10.1, it doesn't find the hard drive. Also, the hardware utility says that the mass storage device is ok.

Any advice/solutions to this problem?

Thanks

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 2개

가장 유용한 답변

The iBook G3 lacks something called "Large Drive Support" Meaning that drives over 128GB have to be formatted into partitions smaller than 128GB in order to be able to be used. You should be able to do this in disk utility on the disk, but you need partitions smaller then 128GB.

해당 답변은 도움이 되었습니까?

점수 3

댓글 1개:

+1 Ralph

댓글 달기

just do it

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Dk1 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 12

전체 시간: 1,295