Removing suction cup marks from glass after replacement

After replacing the glass front on my imac and removing the heavy duty suction cups, I noticed a ring mark was left behind by each suction cup. Window cleaner did not remove the marks--is there a recommended way to safely remove these marks?

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요
Fixmas/픽스마스 분위기를 띄우세요
FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
Fixmas/픽스마스 분위기를 띄우세요
FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오

3개의 답변

선택된 해법

Did you try with with ether or and hydro-alcoholic solution ? only a few otherwise you could make some damage on your screen....

If this answer was helpful please remember to mark it accepted.

해당 답변은 도움이 되었습니까?

점수 2

댓글:

Isopropyl alcohol did the trick--thanks for the suggestion!

의 답변

You're welcome. Thanks for accepting my answer...

의 답변

의견 추가하세요

Here is another option, this will work when nothing else will ! http://www.ibreakityoufixit.com/shop/cle...

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

try the Ritec Ritepolish a mildly abrasive cream cleaner used for the romoval marks left by suction lifters on glass, mineral and other deposits.

http://www.wholesaleglasscompany.co.uk/a...

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

zoomngeorge 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 8

지난 7일: 49

지난 30일: 196

전체 시간: 6,738