주요 콘텐츠로 건너뛰기

Model A1224 / Mid 2007 및 Early 2008 / 2, 2.4, 또는 2.66 GHz Core 2 Duo 프로세서

548 질문 전체 보기

BeePing and black screen after replace HD

I replaced a new HD, plugged my iMac on and nothing. Black screen and beeping. I put the recovery disc in and can not take it out. How can I install a new software? Why my computer is beeping and what a problem with the screen?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 1개

선택된 답변

Depending upon the number and duration of the beeps you damaged (shorted), loosened or disconnected a RAM chip. Check the RAM seat - they snap in firmly... if they are not loose try running ONE CHIP in one side, then the other (only one chip/slot may be bad).

If this answer was helpful please remember to mark it accepted.''

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

Anna 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 626