주요 콘텐츠로 건너뛰기

4세대 iPhone의 CDMA 버전. 수리는 간단하지만 앞면 유리와 LCD를 하나의 유닛으로 교체해야 합니다. 16 또는 32GB / Model A1349 / CDMA 호환성.

295 질문 전체 보기

Power button stuck in depressed state

The power button on my iphone suddenly will not depress. Well it does not spring up anymore. I did not drop the phone or anything. I was looking at purchasing a new button, but then through reading realize it may not be the actual button.

Is there a good way to tell what it could be before I start ordering random part. Thanks!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 4개

가장 유용한 답변

Hi, I am pretty sure that the answer to that is not as described in the answer above. He is asking for a power button issue. U need to buy the proximity and power flex cable. U might also need to buy the power button bracket. Follow the guide on the link below.

iPhone 4 Verizon Power Button Cable Replacement

Write back on what u did. Good luck.

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

The home button's ribbon cable is poped out of its usual place.

Try this guide carefully!!!!!!!!!!!!!!!!!!-

iPhone 4 Home Button Replacement

purchace the button from here-

[연계 제품이 누락 또는 비활성화 됨: IF182-017]

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

Hi, I got the same problem with the power button stuck in my iPhone 4 from Verizon.

I'm not 100% sure if I would have to replace all these parts:

1. Proximity Sensor and Induction Flex Cable

2. Power button bracket

3. The actual button

Or just the first one?

What are your recommendations? And where did you buy the replacement parts, I'm not sure if Amazon or eBay would have the right parts.

Thanks!

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

Just replace the flex cable.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

jedijeff 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 4,052